Jump to content

Apico master cylinder boots


lerk
 Share

Recommended Posts

So I bought some new boots to replace the ripped ones on my Beta.

Pulled the old ones off and built up the new ones before slotting them in, but they don't want to stay fitted into the master cylinder.

I've cleaned out the groove and tried various different positions, but they turn inside out and then pop out when I release the lever.

Next plan is a spot of super glue - am I missing a trick?

Link to comment
Share on other sites

 

 
 

The standard master cylinders on the Beta are Grimeca, so make sure the kit you bought has "for Grimeca" on the label. 

I think that Jitsie and Apico have them so marked, then they will fit properly without the use of any glue! 

Hope this helps!

 

Link to comment
Share on other sites

 

Nope, tried all sorts last night and even though I have the right boots fitted to clean grooves, I couldn't get the boots to stay in place for more than about five actions of the lever...

super glue it is then!

Link to comment
Share on other sites

 
  • 4 weeks later...
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...