Jump to content

Honda RTL carburettor


markg
 Share

Recommended Posts

Hi all,

anyone replaced the carb on an RTL and had success?

- what type of carb was used and where would it be available?

My RTL carb slide sticks even though the retaining nuts are a bit over finger tight. Gets worse if any tighter. 

Any suggestions on a fix or carb replacement greatly appreciated. 

Mark. 

Link to comment
Share on other sites

 

Hey Mark,

 Great ride on Sunday.   

Maybe this will help with your RTL carb.

I had a similar acting slide on one of my old Honda’s.  On close inspection I saw that the index pin had worn and galled up the groove in the slide.  Some very careful work with a set of jeweler’s files smoothed up both the pin and the groove in the slide.  I followed that up with some polishing compound (toothpaste) on the slide and moved the slide up and down with my finger until it was polished.  A good cleaning and it works better than new.  

Link to comment
Share on other sites

 

I tried a flat sided Keihin carb on my RTL but just couldn't get it to run very well. I did notice that the Sherco 4T used a Keihin so posted this thread to see what changes that had:

I never tried them deciding to go back to the standard carb but if yours isn't working they might be worth trying. 

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...