Jump to content

inertia/flywheel weight kit


tahoeacr
 Share

Recommended Posts

 

I have the extra weight fitted to the flywheel of my Gasgas 300, a slim spacer is used to push out the flywheel cover to make room inside for the extra weight and this means the gear lever fouls it.

I have gently bent out my gear lever and I have also 'relieved' the inside face with a sander/file, you also have to make sure the pinch bolt is done up very tight as the engagement on the splined shaft is less than it should be.

It does work but there is no other option as I don't know of any after market gear levers with bigger offsets, this is of course a Gasgas, would be interested to know if a lever from another make or model could be used ?

 

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...