340bulltaco Posted April 16, 2017 Report Share Posted April 16, 2017 Hi there, Can some kind person tell me please, if there should be spacers of some kind between the top of the air box and the frame brackets. Regards, 340bulltaco. Quote Link to comment Share on other sites More sharing options...
bondy Posted April 16, 2017 Report Share Posted April 16, 2017 Hello no spacers needed on the 340 Air box just gets bolted flat against the frame. 1 Quote Link to comment Share on other sites More sharing options...
340bulltaco Posted April 16, 2017 Author Report Share Posted April 16, 2017 Thanks a lot bondy, you're definitely the Bultaco forum guru. Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted April 17, 2017 Report Share Posted April 17, 2017 Be careful not to overtighten and use penny washers cut to fit on underside. Quote Link to comment Share on other sites More sharing options...
340bulltaco Posted April 17, 2017 Author Report Share Posted April 17, 2017 Wise words, thank you. Quote Link to comment Share on other sites More sharing options...
bondy Posted April 18, 2017 Report Share Posted April 18, 2017 I had a S/S plate made for mine that was the shape off the Air box hat the rear with 2 welded bolts that fitted perfectly also I had a flat plate on the front with a welded bolt. Makes Life easier. If its a New Air box you will Need to drill the holes for the side panels be careful they need to be correct or the side panels wont fir proper I have a old B box cut up with the original holes I use as a template works a treat. The under the top bracket holes I do last so I drill the side panel holes first then put the rubber bugs in and pop the side panels on then offer the box up in position so I know how fare back or forward the box has to go 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.