woody Posted October 22, 2017 Report Share Posted October 22, 2017 On 10/19/2017 at 8:26 PM, nivlac123 said: OK I have verified that my swing arm is still a mk 1. Would anyone know which cable I would need. I have the one with the nipples on both ends and adjuster in the middle. Would I need the one with the threaded rod at the end. The cable with the threaded rod at the end is the longer cable, therefore suits the longer swingarm. The cable with the adjuster in the 'middle' is the shorter cable and therefore is for the MK1 swingarm. Quote Link to comment Share on other sites More sharing options...
nivlac123 Posted October 25, 2017 Author Report Share Posted October 25, 2017 Thank you Woody I think to problems is I have to much travel of the brake plate arm before the pads engage. Pads are new there was padding on the round brake pivot on the inside of the plate I have just measured the dia of the hub braking surface and that is well within the manual tolerances. Is it normal to pad out to round pivot? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.