nubsey Posted September 29, 2017 Report Share Posted September 29, 2017 Hi all. Does anyone know how to test an ignition coil on a gas gas 125. I have watched how it is done on you tube, and they state that you should get a reading of about 2 to 5 ohms on the primary side of the coil. On mine I get 0 ohms. So I bought a new coil and that gives the same reading. The coil is quite small so is that normal. All the best Nubsey Quote Link to comment Share on other sites More sharing options...
nubsey Posted September 29, 2017 Author Report Share Posted September 29, 2017 Hi all just bought a new digital multimeter, and it shows that I have 0.4 ohms on the primary side, and about 6000 ohms on the secondary side. I have just wastched a video on you tube and it showed my type of coil and it gave much the same results, so all looks ok with my coil. Nubsey Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.