Jump to content

250 mono c/case work


thai-ty
 Share

Recommended Posts

I've got a downloaded genuine 350 workshop manual. Once it gets to gearbox internals, splitting c/cases and c/shaft work etc, it says "take it to your local dealer".

I have 3 spare 250 mono engines and fancied rebuilding one from scratch as a spare.

1. I presume all workshop manuals available are the same and don't describe the above in detail?

2. Has anybody pulled apart an engine and can give me any pointers, pitfalls and what to expect, particularly;

# g/box cluster assembled in which side case?

# crank can come apart using a normal 15T hydraulic press?

# Big end presses out from which crank side?

# Any other things to look out for?

Cheers in advance.

Link to comment
Share on other sites

 

 

I've just dug out the Yamaha "Owners Service Manual" I have for the Ty250n mono's, as you say it does not cover splitting the crankcases. II can't remember how far I took mine apart,(It was back in 1989... But I think I would have treated it just the same as any other vertical split case bike engine I've had apart.One thing I do remember is how strongly built they were,I think much of the engine was the same as the YZ motocross engine.

Perhaps a long term Yamaha dealer may have had the full dealer version of the shop manual, they must have had something for the dealers to use,especially for the YZ engines where full strip downs would be more likely. Worth E-mailing a few dealers ? This link to one on Ebay is the same as I have ;http://www.ebay.co.uk/itm/Genuine-Yamaha-TY250-N-Mono-1985-on-Factory-Owners-Shop-Manual-Book-TY-250-59N-/282690215346?epid=1623846152&hash=item41d1a65db2:g:sqsAAOSwDmRZ3gOL

  • Like 1
Link to comment
Share on other sites

 
13 hours ago, jon v8 said:

I've just dug out the Yamaha "Owners Service Manual" I have for the Ty250n mono's, as you say it does not cover splitting the crankcases. II can't remember how far I took mine apart,(It was back in 1989... But I think I would have treated it just the same as any other vertical split case bike engine I've had apart.One thing I do remember is how strongly built they were,I think much of the engine was the same as the YZ motocross engine.

Perhaps a long term Yamaha dealer may have had the full dealer version of the shop manual, they must have had something for the dealers to use,especially for the YZ engines where full strip downs would be more likely. Worth E-mailing a few dealers ? This link to one on Ebay is the same as I have ;http://www.ebay.co.uk/itm/Genuine-Yamaha-TY250-N-Mono-1985-on-Factory-Owners-Shop-Manual-Book-TY-250-59N-/282690215346?epid=1623846152&hash=item41d1a65db2:g:sqsAAOSwDmRZ3gOL

Yeah, Thanks, just checked that link, which lead to another Ebay link for another w/shop manual being sold by bike book specialists which amongst the blurb states "everything except splitting the c/cases"....

So, c'mon, somebody out there must have split some cases and had a crank apart. Anybody?

Link to comment
Share on other sites

 
 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...