Jump to content

Bike won't start.


Domc87
 Share

Recommended Posts

Right I bought a gas gas contact 250 92 or 93. It was running  until it was jet washed (not by me) and I know the bike wasn't started afterwards. It had a spark not that great and is getting fuel. It's nearly fired a couple of times with a little bit smoke. But now it has nothing.I have changed the coil in case  that was water damaged it has a better spark but still not firing. I have blew the water out the carb I have dried and cleaned the reeds I have dropped the oil out and put new stuff in and I have had the fly wheel off and checked the key that' fine. It as got me baffled. It' got spark it' getting fuel still nothing. Any help off trials bike geniuses would be much appreciated cheers 

Link to comment
Share on other sites

 

 
 
 
 
 

Are he would of washed it for about an hour easy the paint has been blasted off the pot put it that way. Inside the carb and where the reeds are was soaking mate. I have put fresh fuel in. The carb has been stripped right down by my mate who has a trails bike and he knows abit about them, the carb has been stripped and cleaned. Its getting fuel its got a healthy spark. Fly wheel is fine key is fine. He thinks it could be the rectifier or the cdi not sure if there the same thing. There is a little play in the piston. But one I say it started and ran fine before it was jet washed. Am thinking it could be water damage to the stator.

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...