Tomfarmer Posted January 22, 2018 Report Share Posted January 22, 2018 Can someone let me message them of my bike too see if you think it sound right thanks I’m trying too put a video up but it won’t let me cheers Quote Link to comment Share on other sites More sharing options...
luckydim Posted January 22, 2018 Report Share Posted January 22, 2018 Maybe you can upload the video from your smartphone to youtube? Quote Link to comment Share on other sites More sharing options...
Tomfarmer Posted January 22, 2018 Author Report Share Posted January 22, 2018 I hadn’t thought of that I’ll try now Quote Link to comment Share on other sites More sharing options...
Tomfarmer Posted January 22, 2018 Author Report Share Posted January 22, 2018 Quote Link to comment Share on other sites More sharing options...
lineaway Posted January 22, 2018 Report Share Posted January 22, 2018 Sounfs like mains. Quote Link to comment Share on other sites More sharing options...
huski Posted January 23, 2018 Report Share Posted January 23, 2018 Strip down time,definitely main bearings ,hopefully big end OK,hard to hear anything else Quote Link to comment Share on other sites More sharing options...
Tomfarmer Posted January 23, 2018 Author Report Share Posted January 23, 2018 Yes it was warm before the video could it be jetted incorrectly? And does anyone know a rough cost on doing the main bearings Quote Link to comment Share on other sites More sharing options...
lineaway Posted January 23, 2018 Report Share Posted January 23, 2018 You can get it done pretty cheap. Main bearings, main seals, center case gasket, base gasket and intake gasket. Buy the bearings from a bearing supply. Beta used to have a gasket and seal set. Good luck. Cheaper if you just take the engine alone to a shop. Quote Link to comment Share on other sites More sharing options...
misscrabstick Posted January 31, 2018 Report Share Posted January 31, 2018 I put mains in my Techno a year or so back, had mains, seals and gaskets plus a small end, spent around 120 pounds on parts, also bought a cheap chinese puller to get the bearings off the crank for around ten pounds. Whole job took about 6 or 7 hours I suppose. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.