Jump to content

2011 rear wheel bushing


ric h
 Share

Recommended Posts

.I am the owner of a 2011 Ossa tr280i in Ontario Canada.It has the original rear hub bushing/bearing setup and it is need of a new bushing. I believe the skf # is "pcmf 353916 e".I know that there was a kit available at one time to convert the hub to bearing/bearings with a new pair of spacers.Does anyone know where i can obtain them? I tried local bearing suppliers,but they have a minimum order of $255.  Thanks,Ric

Link to comment
Share on other sites

 

 

Hi Ric, we machined out the hubs to fit ball races, 60042RS from memory, and made up a wheel spacer to suit, with the tyre off, the wheel can sit flat on a large milling machine table. Pretty sure the kit was just a sleeve and a smaller than 6004 ball race. Bye, Peter B.

Link to comment
Share on other sites

 
 
36 minutes ago, peterb said:

Hi Ric, we machined out the hubs to fit ball races, 60042RS from memory, and made up a wheel spacer to suit, with the tyre off, the wheel can sit flat on a large milling machine table. Pretty sure the kit was just a sleeve and a smaller than 6004 ball race. Bye, Peter B.

That'll be a last resort.The bushing isn't as good,but hey,it lasted 7 years.Another bushing would be fine and no more than $10 if i could buy just one.Thanks.

Link to comment
Share on other sites

 
 
 
 
 
 
 
 
 
  • 3 weeks later...
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...