Had the carb off last week, cleaned it out but not 100% what to look for in the way of not been right (nothing looked damager or overly dirty.
How do i know if the jets ect are right, going to take it off again tomorrow and have another look and to check it again as i read last night someone had the same thing and it was a blocked inlet hole or something.
Checked the tap and all seems to work ok, got the bike running tonight, would not kick again so i had a look at the plug and it was black and socking so cleand it and heated up a bit and put the bike on the side to drain the excess out of the carb, put it in and after a couple of kicks fired up and was ticking over fine stopping and starting. Then after 10 mins off would not start again.
While it was running i turned the fuel off and after a while it stalled, turned it on and it started fine.
Like i say i will take the carb off again tomorrow but im stumped.