Jump to content

festerbestertester

Members
  • Posts

    15
  • Joined

  • Last visited

Contact Methods

  • Website URL
    http://
  • ICQ
    0
Contact Information
 
   
Recent Profile Visitors
 
 
1,807 profile views
 
  1. Did you ever find out fork oil amount?
  2. I have a snapped steering shaft on my 250 contact. How is it removed from the bottom yoke? Any help appreciated.
  3. Whoopee!!! I have gears. Many thanks Airman, wish I had a Manual!
  4. The arrowed part on pic 1 seems to catch
  5. I am struggling with gear selection and wonder if the "spidery washer on the cam assembly is in the correct position. Also is there a setting for the selector arms? (second pic) Ignore lack of circlips as just put on for pic.
  6. Just found the service manual which says petrol screw is 4 full full turns out.
  7. Thanks. Was on 1 3/4 and running badly.
  8. Can anyone tell me the approx number of turns for the idle screw.
  9. Hi, I am going to change the gearbox oil on my '98 250 easy, but am unsure of the capacity. Any help much appreciated.
  10. I hope this won't turn into an I'm older than you thread but at 62 having no seat doesn't half play havoc with my back!!
  11. Will be up at cowm in a couple of weeks. Am in an old gray VW camper.
  12. Have alook at http://www.cowmleisure.com/trials.htm There are acres of space for a tenner a day and it's only 25 miles from Darwen.
  13. After a 25 year rest I've got myself a '98 scorpa easy and have gone back to Back Cowm quarries in Whitworth Lancashire. Still as rubbish as I used to be but am having just as much fun.
×
  • Create New...