tomy4x
-
Posts
9 -
Joined
-
Last visited
Contact Information
-
IM on my second oil change now putoline atf first change i could put the bike in gear without it runing away with me, second change i can get neutral most times but there is still abit of drag for the first 15 mins or so. So my next thing to do was the apico plates as they are only
-
I just got a 99 2 weeks ago. It didn't run too well but started second kick so I put a new bpr6es in it .7mm gap cleaned out carb put it all back together idle and mixture back to the same settings an it was a pig to start an would only run with the choke on. so was too lean. But I took carb apart again re-cleaned put it back together an played with the mixture screw for about an hour an till I couldn't kick anymore. In the end mine is out 3 1/4 turns an now starts first kick an runs great? bloody carbs.
-
U mean he's not on the moon?
-
http://montesacota315.com/en/specs.html Try this
-
Bonjour. nice one,good to hear. Makes a change instead of driving 2 hours just to See a completely over priced rat of a bike. Enjoy
-
IV just bought a 99 last week, but before I did I checked on prices and availability and theirs loads of stuff out there, after all its only 14 years old, my last 2 bikes were a 96 climber an a 95 techno an their stuff was plentiful, just check ebay an as for teck check out here! I got mine at a good price an it was well looked after, just needs a new back tyre still loads of tread just badly cracked but the motor is strong. Go get 1!
-
Hi, i did mine on sunday, tried bleeding it normaly and just couldnt get any feeling on the lever so then tried with a syrindge and i got fluid squirting out everywhere. then realised that the spring in my master cylinder was nt returning the piston back far enough for me to bleed properly so for a temp fix i stretched it abit put it all back together and in a few grabs of the lever my clutch felt great again!
-
Like t-shock 250 said it must be a 250, iv just got a 94 last week. if you look on ebay just now ull find what you want. i think there was a few rear sub frames also if you search through here a bit youl find links for pdf manuals Gd look.
