Jump to content

r6eck

Members
  • Posts

    8
  • Joined

  • Last visited

Contact Information
 
   
  1. Thanks for the replies, I didnt think the relay code was important but good you confirmed that. The battery is on a switch , I had 2 of these bikes when they were new , and had no issues starting them. Converted my second with a Li battery and it was a first/second kick starter. Im useing NGK 5 range plugs, cant get hotter . When i enter the page to change fuel ratio the software crashes. I think ive sorted it now, Injector was dribbling, ran it through the cleaner and bike is lots better.
  2. Software now working, I have set throttle up, 1400 rpm idle, tps at 0.61v , done the software reset/learn. Bike still a bitch to start, I doesnt have the factory easy start, but i have hooked up a 12 Li battery . I have injection pulse,fuel pressure and spark ,you can kick and kick with no start, then randomly it will start first or second kick. It will set occasionally set a P1611 Chassis relay fault in history but not in active faults, and all actuator functions work on test. Any ideas ?
  3. Thanks for that Matteo, now paid and downloaded .
  4. Hi guys, I,have ordered a usb to ttl serial uart lead , I am now looking for the software. All links ive found are dead.I appreciate any help. My email is alex.walker@blueyonder.co.uk Regards Alex
  5. Thanks for the reply, the swingarm available is from an early 315, so wont be suitable.
  6. Can anyone tell me if a 315R and a 4rt swing arm are compatible The 4rt in question is a 2005/6 model Thanks in advance
×
  • Create New...