Jump to content

kirsten

Members
  • Posts

    3
  • Joined

  • Last visited

Contact Information
 
   
  1. kirsten

    engine size

    how do i tell what size motor my climber has ?
  2. kirsten

    Spacers

    hi ross , i thought that but what i did was put the 3 back bolts in tight then lift the bike on stand the weight of the bike helps push the plate up then use a 30mm bolt to pull the plate to the frame then put a 10mm bolt in the other side , take out the 30 and put another 10 in (csk m8 allens )
  3. kirsten

    wont run

    hi fella,s just joined this site and just aquired an aprilia climber , would appreciate some feedback on a couple of issues , iv,e had loads of bikes over the years but never a rotax jobbie and as you all know they all have thier own ways of getting on your last nerve . so first off bike runs for 5 seconds and dies ,cleaned carb out with airline , the same! mains are rumbling , plug soaked when stops ,and what is the 2 stroke mix on this bike , regards lee
×
  • Create New...