Jump to content

sando994

Members
  • Posts

    73
  • Joined

  • Last visited

2 Followers
 
   
Contact Information
 
   
Recent Profile Visitors
 
 
4,193 profile views
 
  1. Yeah that’s the sort of info I’m after, but that’s just the pump. I’d like to find the whole pump unit/assy. basically, I’m wanting to fit a 2020 tank to my 15 model. But I’ve been told I’d need a pump unit from a 16 or newer.
  2. I tried google and that part number only comes up with results for the 2016 montesa. Surely montesa haven’t had a pump specifically made. Like most manufacturers, I’d have thought they’d select a pump off the shelf and use it on their bike.
  3. The price of a 2016 fuel pump unit is massive.... quoted £453! surely it’s a common item taken from a road bike. Would anyone happen to know or have the means to find out if it’s used on another motorcycle?
  4. Thanks jimmyl, I’ll have to get the Showa spindle and Speedo drive then.
  5. I have a 2015 4rt standard. Ive been offered some Showa forks from a repsol model. Does anyone know if I fit the forks, is the front spindle the same for the tech and Showa forks?
  6. If you suspect blow by. A simple check on the colour of the spark plug and a compression test will confirm it for you. Then you’d just have to investigate if it’s rings or an exhaust valve. If that’s all good and you think it’s coolant, pressure test the cooling system. OR drain and replace with new coolant at right mixture OR replace with something like Evans waterless coolant (it’s oil based with no water content, so it won’t create any steam).
  7. I have one fitted!! H&D have a video of my bike on their Facebook page. In my opinion, it’s unbelievable value for money and I’m not afraid of dropping the bike (compared to, if I’d bought a termi system ?). Sounds awesome (a deeper tone) and smooths out the bottom end. Im also in the process of playing around with a few different maps.
  8. All sorted now, with thanks to teddybattye ?? Much appreciated
  9. Hi Jimmyl, what windows system do I need to be running? I have tried it on windows 7 32bit but it I’m struggling to install the software. This is is all the files on the disc that I bought. also in the pics are the problems I’m having when trying to open the 07 application. So I’ve potentially been sold the wrong stuff, using the wrong version of Windows or need to install some sort of software to be able to open these files....... anyone that could point ne in the right direction??
  10. So..... I’ve got the parts fitted to the bike and the disc in my laptop. From what I’ve read, I’ll need a 12v battery too? Will the software auto start when everything is plugged in? Basically, I don’t want to mess anything up and need someone to walk me through it once.
  11. I know this subject has been covered lots and lots and lots and lots of times before. However, I’m looking for someone local to me that has the experience with the mapping software. I have fitted the twin map throttle body, switch, have the cables and software............. is there anyone in the Herefordshire area that has used the software before and wouldn’t mind helping me out??? thanks in advance, Sam
  12. Take the rear mudguard off and look on top of the throttle body.
  13. I've got a 2012 beta 80. When I bought the bike, I stripped it down to have a good look and clean up. Now I have the bike back together, it runs but the revs hang on for a few seconds and the throttle response is boggy. Do anyone know the standard settings for this carb? Especially the mixture screw.
  14. 2015 4rt front brake master cylinder leaking (braketech) never had the cap off or caught the brake lever hard enough for it to pop any seals. Break still works and isn't spongey. Its leaking from the tiny hole on the cap (when the brake is applied) Has anyone had any problems with break tech cylinders?
  15. There is a complete kit on eBay, to transform a 4rt to the 4Ride. It's not cheap mind....... Almost £3k
×
  • Create New...