Jump to content

nils

Members
  • Posts

    3
  • Joined

  • Last visited

Contact Information
 
   
  1. Here is the link to the movie I shot and uploaded: It appears that the mechanism requires some power to put the lever back in the original position... Nils
  2. Hi My Yamaha TY 125 reveils some problems during shifting; for example a shifting pedal that doesn"t return. It also takes a lot of effort to change gear... I just reassembled my engine, WITH renewed gear mechanism in the small compartiment on the left hand side. Do you think I should replace all springs which are linked to the selecting mechanism? Thanks! Nils
  3. Hi guys I'm experiencing the same problem as Ivorybull; just put back together my engine and cannot start it because the kick start axle moves outwards. I did notice during the reassembly that I have a kick axle without the groove for the outer circlips... My middle casing on the RH side did show some marks from former springs 'breaking loose', but do you think this could be the problem for mine? The kick spring still works, as the lever returns (eventhough I have to guide it a bit). Does anyone have experience with placing a bushing between the large washer and the outer casing? Thanks a lot, Nils
×
  • Create New...