Jump to content

cs9575

Members
  • Posts

    4
  • Joined

  • Last visited

Contact Information
 
   
  1. Thanks everyone for the tips. I have not had time to troubleshoot but I hope to find some this weekend. I will be sure to post my conclusion once I find it. And Copemech its a 2011. Have a great weekend!
  2. Ya I actually just did that straight to the carb bypassing the fuel filter. No luck....
  3. Hi there, I was out riding when my Sherco stalled on me. I started it no problem but needed to keep the RPN's high to get it back to the car. When the RPM's dropped it stalled. Now it flat out won't start as if its not getting gas? I pulled the in line fuel filter to see the flow and there is plenty. I changed the spark p[lug. Still no luck? Do the fuel pumps on these go bad? Any leads would be HIGHLY appreciated! Thanks....
  4. Hi there, I bought a used 2011 Sherco 290 trials and have been told what oil you use can help how the clutch hits. There is 75wt gear oil in now. The manual says 10w40. The clutch is not as smooth as i like at slower speeds. So without changing the springs what oil should I use to HELP make the clutch as smooth as possible and less of a hit? Thanks a bunch!
×
  • Create New...