Jump to content

terrier

Members
  • Posts

    23
  • Joined

  • Last visited

Contact Information
 
   
  1. I have Fieldforce Limb Tubes, low profile and flexi, done the job well so far!
  2. My first year coming up, £1400 old sherco £500 upgrades and reliability parts purchases (lanyards, Jitsi bling, short levers, kickstart springs, carb rubber intakes, filter, mudguards etc. Further £200 on maintenance renewal of worn parts at end of year. £40 lubricants such as chain and filter oils, gearbox oils, 2 stroke premix, fork oils. ACU membership £10 Local club membership £10 South Western Gazette entry form newsletter 12 editions £20 per annum practice £5 per day Clothing £103 boots wulfsport + £99 clice pants + £35 wulfsport shirt +£ 80 helmet + £100 for rain coats, hydration pack, gloves, fleece gillet, etc comp entries £13 - 15 travelling no further than 1 hour / 60miles for SW club comps with own trailer. fuel for event currently £1.10 per Ltr stand £35 flywheel puller £20 specialist tools Enjoyment factor, priceless!
  3. Well, clutch cover off to find the lower leg of the selector spring cracked but still attached. Simple job, but thanks for the info befor openning. I've ordered all 3 springs there while I have her open. (Kickstart, selector and index). Cheers
  4. Thank Do2 , my thoughts too. I'll update tomorrow if I have time, and no, I won't run it untill the fiend is retrieved. The box goes into gear ok and retains gear, just the lever has a flop on!
  5. I found this link previous, sounds like my issue. http://www.trialscentral.com/forums/topic/28123-03-sherco-250-gearbox-problems/
  6. Hi guy's, I'm in Somerset, Uk with a 2001 290. Shes been brilliant and bulletproof last year, but after a ride today we have gear selection issues. I have a comp next weekend, so with a heads up on advice here, I can get sorted. The fault is when correctly up changing through the box to 30mph no probs, but will not index down through the box. It just bulks and goes firm, and the clutch is clearing ok. (In hindsight I should have tried back up to go down when I was riding) anyway, if I stopped the motor, It would go down to neutral and 1st. I have just gone to check the bike before posting this, and it looks like the gear change lever is not springing back, so I'm guessing a selector spring broken?????. I would appreciate some experienced input on likely culprit and list of probable bits and gaskets I would need so I can quickly get an order in tomorrow.
  7. You're on to something Do2, Splat Shop list bolts and bleeder AJP as M10 x 1.0 pitch, and if it was M10, I would have expected to see a fine pitch, anyhow looks like I'm on a winner with 10mm dia to get the hose made thanks. Wayne
  8. Don't need pitch info anyway, I can look at that for future ref when I take it out.
  9. Cheers bud, I've just seen a listing on ebay for an Apico AJP anodised union in M10 x 1.25, so seems s good punt. Just means I can get a new hose made without bothering to dismantle the current hose assy and have the bike unridable. The Beta Evo's use M8 x 1...........Thanks W
  10. Hi guys, looking to order a sexy custom front hose for a AJP caliper on my 2001 290 from the HEL website custom build page. Can anyone tell me the dia of the banjo bolt please to save me bleeding it down., they give me option of 10, 11 & 12mm. I'm looking at it thinking its 10mm. Many thanks, Wayne
  11. This sounds like the perfect place for a holiday, Sun, Amstel, Mythos, cheese pies and trials. Wheres my passport?
  12. Ouch, I watched lads riding at the show Sunday and they were great. I was thinking how easy it would be to make a mistake after riding the same course over and over. Get well soon.
  13. Hi hrmad, I am 40, and been road riding, never taken part in offroad activity ever. I've always enjoyed watching trials on TV, so with some spare cash I bought a second hand sherco this Easter and joined my local Yeo Vale. My first trial however was with Somerton club at 'The Beacon', and I put pride aside, and in hindsight correctly signed up for the beginners seperate route. My first foray into trials was a total success, eye openner, and thoroughly enjoyed myself. Since then, I've taken part in all the Yeo Vale beginner days, but work commitments prevent me being able to get other practice in, and it's been a gradual transition where upon I've just done the Somerton Binegar trial in novice and managed to clear all but 2 sections on the day without being too intimidated. I enjoy the company, banter and most of all the riding without scaring myself! There you go, have fun, regards, Wayne
  14. My Nau Power fitted better than an Airoh on me, so happy here with the cheaper option, lovely quality and spec for the price. I see Wulfsport may be launching a new trials lid shortly as shown in last week TMX. Wayne
  15. I see Motors TV are showing the Penrith FIM footage 09:00 this Saturday morning also. Set the record button!
×
  • Create New...