jamie123

Thanks for the reply. Yeah i put the backplate in the exact way it came out. The only thing i am unsure about is which way round the wee black box that sits above the flywheel goes. I have it where you can see they numbers upside down and the wee pin at the bottom pointing to the flywheel. I don't know if it goes the other way or not?

Hi folks, I just replaced the ignition stator on my 2012 beta evo 250 2 stroke and it sparks now (since it don't before, hence replacing it) but it still doesn't start. I tried kicking it and every now and again it would backfire but never ever fired into life. The woodruff key is still there so isn't that. Any help would be greatly appreciated. Thanks

Hi, I have a 2012 beta evo 250 and I bought a jitsie lanyard kill switch and I cannot get it to connect with the bike. The lanyard comes with a black wire for connecting to the ignition and a brown earth wire. The wires on the bike are different. There is 2 wires coming from the top of the shock area which one is black and the other is black and white and they both connect to a plastic white connecting point with a square end. I have tried a lot of different things but none work. I got a normal kill button fitted 2 years ago because the bike wouldn't start and the wires for that kill button are one is black and the other is black and white just like the ones on the bike and they both connect to a white plastic connector that fits in the bikes square, white connecting point. Any help would be much appreciated. Thanks