Jump to content

bizziline

Members
  • Posts

    10
  • Joined

  • Last visited

Contact Information
 
   
Recent Profile Visitors
 
 

The recent visitors block is disabled and is not being shown to other users.

 
  1. Thanks for that, managed to get some bearings f.o.c from the engineers workshop at work, will put it together and see what fettling needs doing with the spacer and get a one made up instead of the speedo drive. Cheers
  2. Many thanks for clearing that up, now the next poser, on my loose spindle I only have 1 spacer and a speedo drive is that all there is or am I missing something, also I take it the tube I have compresses between the bearings in the hub. thanks again
  3. Thanks for replies gents, just had a quick measure and the outside diameter appears to be 40mm ish with a axle diameter of 15mm .....did the 305 take a bigger bearing or another variant as I bought the wheel separate but is akront with a fluorescent red / orange hub confused now cheers
  4. Yeh I did that with Bob Wright and he sent the wrong ones,wanted to try my local bike shop
  5. Hi,can anyone tell me the wheel bearings sizes front and back please as the wheels I bought didn't have any fitted to match up thanks
  6. Went to fit bearings to wheel I bought with none fitted and found they were the wrong size, probably rear ones supplied as they are bigger, might as well keep hold of them anyone know the correct sizes cheers ... 245
  7. bizziline

    Fantic 245

    Just seen that in the parts manual I got unless there is anything better cheers Barry
  8. bizziline

    Fantic 245

    Hiya cheers already have these but thanks.....wouldn't mind a copy of the right way up forks diagram tho if you know of a copy..... bizziline@hotmail.com
  9. Any chance of a copy of exploded view of the right way up forks fantic 245.many thanks bizziline@hotmail.com
  10. bizziline

    Fantic 245

    Hiya everybody just joined this group thanks for having me. I am currently putting a 245 back together and would like some help. Most likely going to ask some basic questions so please bear with me thanks again Barry
×
  • Create New...