Jump to content

ianb

Members
  • Posts

    21
  • Joined

  • Last visited

Contact Information
 
   
  1. All sorted thank you all. Full carb strip and clean.
  2. I’ve just checked the spark and it’s great, it sometimes starts and dies or backfires
  3. Hi all, looking for some help please. Bike running and starting fine yesterday and became gradually more difficult to start. It would almost catch then bubble and fart or backfire. Sometimes would start on full throttle. Spark looked a little weak but I was outside. Stripped the carb today, changed the plug started ok ish but better after being tipped on its side. Any ideas appreciated.
  4. Hi Guys I left an NZI carbon lid there today, if anyone has picked it up, please give me a call on 07766 917467 cheers Ian
  5. ianb

    Rev50 Rear Sprocket

    Is there anyone who can help me with this one please?
  6. ianb

    Rev50 Rear Sprocket

    Hi All I have posted this once before, however it seems to have dissapeared!!! Can anyone tell me the advantage of changing the rear sprocket on a Rev50 from the current 53 tooth to one with less teeth. The current one is worn and needs replacing and 1st gear is very short. I wondered if changing it would make this gear a bit more useable. Any help or experience gratefully accepted.
  7. ianb

    Stolen Bikes

    wonder if anyone could help me out regarding the above. I have had 2 trials bikes stolen from my garage on Monday night in Prestatyn; they are 1. Beta Rev 3 270. 2002 with 2006 black and silver plastics and stickers, distinctive black front mudguard. Gear lever spring is broken, black renthal bar pad. Domino grips with orange bar ends 2. Beta Rev 50 childs trials bike. 2002. Red and yellow, distinctive white stickers on the forks. wispa piston sticker on the left front sub-frame. Bar end on clutch side only These bikes were unfortunately uninsured and whilst I just see mine as a lump of metal my 8 year old son is devastated at the loss. If anyone can post this information to any other clubs and events I would really appreciate it. I will happily provide a reward of
  8. Frame and engine numbers rev 3 Frame zd3b9000010005085 Engine zd3b9t024712zl11 Frame number rev 50 - 00027
  9. ianb

    Beta Rev 3 Id

    Hi Steve Post a pic and we can identify it for you
  10. I wonder if anyone could help me out regarding the above. I have had 2 trials bikes stolen from my garage on Monday night in Prestatyn; they are 1. Beta Rev 3 270. 2002 with 2006 black and silver plastics and stickers, distinctive black front mudguard. Gear lever spring is broken renthal bar pad 2. Beta Rev 50 childs trials bike. 2002. Red and yellow, distinctive white stickers on the forks. wispa piston sticker on the left front sub-frame These bikes were unfortunately uninsured and whilst I just see mine as a lump of metal my 8 year old son is devastated at the loss. If anyone can post this information to any other clubs and events I would really appreciate it. I will happily provide a reward of
  11. ianb

    Rev 3 Carb

    Quality answer, thank you
  12. ianb

    Rev 3 Carb

    Hi All I have read in many posts, the need to drain and clean the carb after use. I have also read that there have been many problems with the Mikuni carb, which I do not experience. I have no starting problems hot or cold, uphill or down dale. Do I leave things alone or follow the suggestions here if so, how do I go about draining and cleaning the carb. Many thanks Ian
  13. Has anyone used these? What does the kit consist of? are they laminated, Many thanks
  14. ianb

    Flywheel Weight

    Hi All I am riding a 270 rev 3 and whant to know how much difference a flywheel weight will make to the running of the bike. Apologies for my ignorance but I am not sure if I have one on. Many thanks
  15. ianb

    Rev 3 Noisy Gearbox

    550ml of 10:30 semi synthetic Silkolene
×
  • Create New...