Jump to content

mont

Members
  • Posts

    23
  • Joined

  • Last visited

Contact Methods

  • Website URL
    http://
  • ICQ
    0
Contact Information
 
   
  1. mont

    rattly clutch

    no thats just how they are, they all do it
  2. hi I run this conversion on my 225 it runs alot smoother as the front sprocket has more teeth on. Previosly I ran a 9 tooth so it used to eat sprockets and wear chains. When you spin the wheel it runs reely smooth now.
  3. mont

    Polished hubs

    Hi try a tooth brush with solvo atosol metal polish and plenty of elbow grease and a lot of patiance.
  4. .yes I ride a 225 and it dose feel smaller and lighter than my 250 used to. Billy you will have to have a go next time I see you.
  5. mont

    Gasgas Sump

    Hi try Simon at Kelcote in Leek, he has loads of second hand gas gas pro bash plates. 01538 383547. He is a top man and will help you out with most bits as he has one or two pro s the he is breaking.
  6. mont

    New Gas Gas 250

    Im on my 3rd gas gas and can highly recomend them, you wont be disapointed ENJOY!
  7. Hi , had a 2004 for 5 years and it was a fantastic bike . No problems and road very well. I now have an 09 gas gas but have kept the forks off my 04 they have a much nicer action . hope this helps.
  8. HI got an 09 one and its the dogs dangly bits, realy nice to ride.
  9. Hi boil the kettle and pour over hub making removal of bearing alot easyer,
  10. mont

    G G Silencer

    Dooh no rivets in an o4 silencer, so just cut the end where the rivets would normaly be. Then follow previous instructions and reweld.
  11. I am a welder by trade and have never seen this before. Looks like agood product have a go should do a good job
  12. mont

    Frame Protection

    Try Birkets first, if not kelcote in Leek will powder coat your frame better than new.
  13. Now youve got me thinking, how about a new frame for my gas gas in titanium. I am a fabricator just seems like their might be a market out there for someone?
  14. Hi had simular problem with mine. You have to download the disc that came with the camera so that the computer can read your sd card.
×
  • Create New...