lacho

Mine is a 1990 and takes a 120 (4.00) conti trail tyre. I had a 130 michelin enduro knobly on it and it fitted apart from a tiny bit on the chain guard but i chopped the edges of the knobbles off one side !

I would VERY highly recomend a Yamaha serow xt225. They are just brilliant. I passed my driving test earlier this month and have started riding it on the road but ive had it since i was 15. I've used it for a lot of offroad stuff and it is so capable. It has enough power for most things, is light enough and is very easy to handle. My dad has one too and we just spent a 3 days trail riding in cumbria on TRF routes and neither of us had any troubles, both bikes are 1990. Bits are readily available and not dear. I am 6'1" and weigh 15 stone, and the bike is fine for my size. My dad's mate had the alp 200 with the suzuki engine and the serow is MUCH nicer. Better to ride and probably better made. Once again, highly recomended!

Got the pictures and deary me! They have huge scuffs on them and look like they have been used for two seasons rather than two hours I have emailed asking for a refund which he did offer, so looks like I'll be on the look out again Oh and the price inc p&p was 94.50. Anybody know where i can get a good price on these boots?

Cheers guys, i should have said the alpinestars i bought were the trials no stop boots. Sounds good with the comfort, just need till the guy stops p****** me about, advertised as "as new boots" two hours use. Just emailed me saying he just noticed scratches on them eBay eh!

Thanks guys, i'll check those out. Do you reckon any good quality light motorcycle gear oil will be an ok thing to use?

Hello, i have a 2000 250 beta rev3 and im not sure what the previous owner has done so i want to change the transmission oil. I was wondering what grade of oil to use. In the book it says 20w-30 but the only gearbox oil i have is some 70w-80 and ep90. I also read somewhere oils have different ratings for gearboxes and crankcases and was wondering if maybe the beta book gives a crankcase rating because i have never seen gearbox oil with a rating as thin as 20w-30. Also the clutch drags slightly when the oil is cold and i'd quite like it to not do this i was wondering if people know which oils are bad for this. Thanks for any help

Thanks for the replys, i have got a pair of alpinestars on ebay I tried on a pair of alpinestars tech3 motocross boots and they were extremely rigid and hard and i was wondering if the trials boots will be any more flexible and softer because the tech3s really restricted movement. Can anyone give me an opinion?

Hello again, i have been looking further into buying boots and i have found a few pairs although most seem to be too expensive like the hebo boots and the sidi zeros. The diadora stone 2 is about right in terms of price and the alpinestars no stop looks good but is a bit pricey. I was wondering if people could tell me what these boots are like if they own them and also if they could recomend any other boots between 100 and 150 quid. Thanks for your help.

I think it must be similar as it is membership os the scottish auto-cycle union (SACU)

Well I don't think its too powerful for me, I have had a lot of experience riding bikes offroad and I am a big guy (6'1" and 15 stone). I had a go on a 2006 125 gasgas and it seemed a bit gutless, the 250 beta seems pokey enough but not out of control. You are probably right about the helmet, it is very elderly. I think the lanarkshire club sounds good as I stay 200m from the scottish borders, in lanarkshire and galashiels isn't far from where i stay. Thanks very much for all that information, I shall be making further enquireys before long

Hello everyone. I am considering getting a lisence and joining a club but i have no idea how go go about it. I am 17 and have a 250cc, can I compete on this bike??? I am located in the scottish borders 20 miles south of edinburgh and was wondering what clubs there are around here to join. My dad dug out an ancient fantic motors fluorecent orange helmet for me to wear which fits ok and i have motocross gloves, but i still need boots and trousers. I'm not wanting to spend megabucks, but at the same time i want something comfy and decent enough to last a while. Is there any particular brands i should look out for and are there any cheap places on the net that sell trials clothing. Thanks for any help, Lachlan.

Thank you all very much for your help, i will take all this into account I hope to be reassembling it tomorrow after school and i will get back to you if there are any problems. Thanks again, Lachlan.

Hello again, my shiney barrel just got back from langcourt after they removed the deep gouges left in it by the piston, and so i now have all the parts to put together the bike again. I was just wondering if anyone could recomend tips for running the new piston in, i.e. time and rev limit? Also anytihng i should be checking as i reassemble? The bike is a 2000 250cc rev3. Thanks for any help

You can get a full set (4 bearings) from ebay for

I have actually made some progress with the current wheel. I removed the rim and stood on it/bent it back into shape, relaced it and trued it up. It looks ok now, just has a fairly noticeable flat spot (perhaps 4-5mm inwards from the rest), but I don't think you'll notice it when riding. I'm gonna put it back on and see how it fares and if needs be replace it when it goes out of true. Atleast this spreads out the financial damage of the incident.