Jump to content

leesmichael

Members
  • Posts

    10
  • Joined

  • Last visited

Contact Information
 
   
  1. the mixture screw was right in tight so we turned it 2 and a half turns out then set the tickover till it was running fine.
  2. My bikes running fine now we've done some of the things you lot have suggested. Thanks for all the help guys.
  3. Checked the fuel filter and the stator just don't no whats wrong going out on it tomorrow so we'll see whats what and have a play around with it .
  4. The bike seems to tickover for about 10 secs and then seems to just die like its starving for fuel.
  5. hi everyone My sherco has been runnign poorly for the past few weeks, we've stripped it down twice and cleaned out all the jets and the carb. We've also moved the needle setting back to standard as we had to move it when we first got the bike. any suggestions welcome thanks.
  6. at scarbrough practising yesterday my mate said its near addingham moorside but he tells lies so i don't know what to think.
  7. I've heard its at scarborough low north park
  8. hi can anyone tell me how to change a cable clutch to a Hydraulic clutch on a Scorpa four stroke 125. Thanks
  9. Had my Sherco 125cc about 2 weeks ok but cold weather making it run like a pig lowered needle by one notch that was after turning it upside down and pumping fuel out of crankcase (turn fuel off when not using it.) will give it a good blast round tomorrow (run out of daylight)
  10. Check out my picture, yet again dougie looks so interested Doesn't He! Please someone give him a hankie!!
×
  • Create New...