Jump to content

bengrainger1985

Members
  • Posts

    10
  • Joined

  • Last visited

Contact Information
 
   
  1. Hi does any one know if it is a normal are backwards thread on the clutch as I am having trouble undoing it thanks
  2. Did you need any special tools to strip the engine
  3. Hi I've had two betas a 06 and a 09 both had gear box problems I've also had 4 shercos witch I had no problem maybe just unlucky but I won't be buy another beta that'sfor sure also had a scorpa with no problems
  4. I think a cogs lost some teeth lots of shavings in oil and on drain plug sprockets notchy and clicks when you turn it
  5. Thanks I forgot about freestyle but I'll give them both a call see who can do it first as I can't wait to ride it lol
  6. Can any one recomend someone to rebuild a beta evo engine in Kent or the southeast area only used the bike twice and its broken total gutted
  7. The engines nearly out of the bike now there is no play up or down the sprocket is notchy when you turn it and makes a clicking sound
  8. The rear wheel bearing collapsed sprocket side making the chain slack so started pushing it then heard the noise its not constant it dose it like every half rotation of the wheel
  9. The chain and sprockets are new every thinks clean wheels straight hope it is a bearing there's a lot of cogs in there and it could be expensive if ones lost some teeth I was in the middle of the woods when I noticed and had to push it half a mile back to the van fingers crossed
  10. Hi all when you push the bike it makes a grinding noise sounds like its coming from the front sprocket area any help would be much appreciated only been on it once
×
  • Create New...