Jump to content

skippy1234

Members
  • Posts

    82
  • Joined

  • Last visited

Contact Methods

  • Website URL
    http://
  • ICQ
    0
Contact Information
 
   
Recent Profile Visitors
 
 
3,309 profile views
 
  1. skippy1234

    Crank Seal?

    noticed gear oil seems to be vanishing and today going up hills bike was like it had choke on slightly,,could it be the crank seal,and I think I can change it without splitting hopefully,thanks all,,rev 3 2004
  2. hi all,can anyone give the best advice on how to get the needle bearing out of the crankcase where the gear change drum sits into,thanks
  3. hi all,what is the standard/stock sprocket size for a 04 rev 3,,i have a 11t on front cant remember rear as too dark to look at mo,1st gear is too low and second bit high I tend to feather the clutch,was going to put it back to original and see what its like,thanks,,,,just checked its 41t on rear
  4. hi there,if you transport it with the fuel on ,you will flood it like i used too and it will take forever to start-only my input tho
  5. any more info please as could ,do with starting this weekend,thanks
  6. hi all,was wondering if there are any hicups in splitting a 315 engine to replace mains,have done a beta rev 3 with no probs as everything internal stays on the left hand casing ,does the 315 split the same ,also i am looking for an exploded view of the engine its a 98 -315 cota honda engine,also parts list with the bearing numbers ,thanks
  7. was the mains ,fitted new ones ,now no play at all ,slight top end rattle now tho-but a great tight engine ,had trouble with clutch but got a syringe from cake shop and back bled in 1 minuete
  8. if i tilt the bike over to the left it rumbles but no noise when leant to the right
  9. sounds like your carb may still have a bit of crap in and being starved of fuel ..... just my pennies worth tho
  10. hi its 2-3 mm normal mms as on a tape measure ,cheers
  11. hi,by visual it looks 2/3mm max its on its side as ive took clutch casing off,the crank is moving as well,thanks it gives a clunk when moving it fast
  12. ive took clutch cover off abd the bolt on the primary gear is tight
  13. hi all ,took me fly wheel cover off me rev 3 to see if there was up and down movement off the fly wheel as there is exessive vibration and thought maybe mains had gone ,but i have a lot of in out movement is this normal and could it have something to do with the odd knock i thought was detonation-thanks
  14. i normally put just under 500ml in then you get 2 changes to a tub of oil
×
  • Create New...