<?xml version="1.0"?>
<rss version="2.0"><channel><title>Beta Latest Topics</title><link>https://www.trialscentral.com/forums/forum/5-beta/</link><description>Beta Latest Topics</description><language>en</language><item><title>Just a good find worth mentioning about the keihin pkw carb</title><link>https://www.trialscentral.com/forums/topic/86045-just-a-good-find-worth-mentioning-about-the-keihin-pkw-carb/</link><description><![CDATA[<p>Hi all though id share this to help others trying to sort out fuel mixture problems ect.</p><p>If you have a keihn pkw carb and your plug is showing rich mixture black sooty, it may be worth replacing the center gasket which has the two security screws. </p><p></p><p>Other symptoms is now power band at all and the pilot screw makes no difrence when turned.</p><p>I had this exact problem and put new gasket in and transformed the bike.</p><p></p>]]></description><guid isPermaLink="false">86045</guid><pubDate>Fri, 25 Sep 2026 09:36:10 +0000</pubDate></item><item><title>Beta Sincro 200</title><link>https://www.trialscentral.com/forums/topic/86299-beta-sincro-200/</link><description><![CDATA[<p>Does the 200cc model have enough power for a 183 lbs. sportsman rider?</p>]]></description><guid isPermaLink="false">86299</guid><pubDate>Wed, 04 Nov 2026 00:29:15 +0000</pubDate></item><item><title>Grimeca master cylinder rebuild</title><link>https://www.trialscentral.com/forums/topic/86305-grimeca-master-cylinder-rebuild/</link><description><![CDATA[<p>Having a go at rebuilding a grimeca front brake master cylinder off a 2014 125 beta. Had all sorts of problems trying to bleed it and even bought a syringe to try and reverse bleed it. I managed to get fluid up to the end of the brake hose but not into the reservoir. I ordered a new seal kit and my thinking was just to strip it down, clean everything, and replace the seals. Two questions, the seal kit comes with an O ring which I don’t know where it goes, I know the other two seals but when I’ve stripped it I’ve not seen the O ring. The other question is in the other rebuild kit which you can get has an extra spring which again cannot find it. Mine has the longer spring but not the short one. Not sure if someone has stripped it before and left the parts out. Does anyone know anything about where the O ring and spring goes and do I need them?</p><p>thanks for any help</p>]]></description><guid isPermaLink="false">86305</guid><pubDate>Wed, 04 Nov 2026 18:22:47 +0000</pubDate></item><item><title>Beta Sincro leaking gas</title><link>https://www.trialscentral.com/forums/topic/86048-beta-sincro-leaking-gas/</link><description><![CDATA[<p>Hello,</p><p>Has anyone else with a 2026 Sincro had a problem with gas coming out of the carb overflow?  The obvious causes could be:</p><ol><li><p> A bit of debris had jammed the needle valve.</p></li><li><p> A float that has a hole in it.</p></li><li><p> Float height that is set too high.</p></li></ol><p>Since the bike is new, I am currently waiting for a replacement needle valve and float before I tear into it in case that is the problem.  Flushing the float bowl out by removing the drain plug did seem to stop the leak for about one hour of riding.  The bike did not leak for the first 20 minutes of riding.</p><p>Not a big deal at all, I am just curious to see if any other Sincro owners have had this problem.</p><p>Thanks in advance.</p>]]></description><guid isPermaLink="false">86048</guid><pubDate>Sat, 26 Sep 2026 00:07:21 +0000</pubDate></item><item><title>2019 300 4t</title><link>https://www.trialscentral.com/forums/topic/86168-2019-300-4t/</link><description><![CDATA[<p>I'm looking at a 2019 EVO 300 4t, any comments on the machine</p><p>Guy</p>]]></description><guid isPermaLink="false">86168</guid><pubDate>Tue, 13 Oct 2026 23:00:27 +0000</pubDate></item><item><title>Beta Sincro Clutch spring settings...</title><link>https://www.trialscentral.com/forums/topic/85089-beta-sincro-clutch-spring-settings/</link><description><![CDATA[<p>
	Hi, 
</p>

<p>
	Delighted with my new 250 Sincro but the factory website says there are three variables for the clutch spring tension but no info on how to change them.
</p>

<p>
	Has anybody tried it out yet before I take the clutch cover off?
</p>

<p>
	 
</p>

<p>
	Thanks in advance!
</p>
]]></description><guid isPermaLink="false">85089</guid><pubDate>Thu, 22 Jan 2026 13:23:12 +0000</pubDate></item><item><title>Rev 3 250 head removal</title><link>https://www.trialscentral.com/forums/topic/86108-rev-3-250-head-removal/</link><description><![CDATA[<p>Hi all does any one if you can take the head off a 08 rev 3 250 whilst the engine is still in the frame. Thanks </p>]]></description><guid isPermaLink="false">86108</guid><pubDate>Mon, 05 Oct 2026 15:07:43 +0000</pubDate></item><item><title>Beta techno 1994 rebuild: Video</title><link>https://www.trialscentral.com/forums/topic/85630-beta-techno-1994-rebuild-video/</link><description><![CDATA[<p>I bought this bike 5 years ago maybe 6.</p><p>First Owner bike.</p><p>Used stickers and plastics but this bike was in very good condition.</p><p>It's time to work on this bike ... one of my dream bike.</p><p> </p><p> </p><p><img src="https://i.servimg.com/u/f49/13/93/49/47/26618010.jpg" alt="Beta Techno 250 1994 restauration. 26618010" class="ipsRichText__align--block" width="1024" loading="lazy"></p><p><img src="https://i.servimg.com/u/f49/13/93/49/47/20250912.jpg" alt="Beta Techno 250 1994 restauration. 20250912" class="ipsRichText__align--block" width="1024" loading="lazy"></p><p><img src="https://i.servimg.com/u/f49/13/93/49/47/20250914.jpg" alt="Beta Techno 250 1994 restauration. 20250914" class="ipsRichText__align--block" width="1024" loading="lazy"></p><p><img src="https://i.servimg.com/u/f49/13/93/49/47/20250915.jpg" alt="Beta Techno 250 1994 restauration. 20250915" class="ipsRichText__align--block" width="1024" loading="lazy"></p><p><img src="https://i.servimg.com/u/f49/13/93/49/47/20250916.jpg" alt="Beta Techno 250 1994 restauration. 20250916" class="ipsRichText__align--block" width="1024" loading="lazy"></p><p><img src="https://i.servimg.com/u/f49/13/93/49/47/20260628.jpg" alt="Beta Techno 250 1994 restauration. 20260628" class="ipsRichText__align--block" width="1024" loading="lazy"></p><p><img src="https://i.servimg.com/u/f49/13/93/49/47/20260629.jpg" alt="Beta Techno 250 1994 restauration. 20260629" class="ipsRichText__align--block" width="1024" loading="lazy"></p>]]></description><guid isPermaLink="false">85630</guid><pubDate>Mon, 08 Jun 2026 16:57:03 +0000</pubDate></item><item><title>Beta Evo front disc guard...is it actually any use?</title><link>https://www.trialscentral.com/forums/topic/86009-beta-evo-front-disc-guardis-it-actually-any-use/</link><description><![CDATA[<p>Just musing about this, mine's pretty knackered. It's looking rough, splits and cracks. I was going to order a new one but then though 'is it actually worth it'? I mean it's flimsy plastic, how much protection can it really offer? Does anyone ride without it?</p>]]></description><guid isPermaLink="false">86009</guid><pubDate>Sun, 20 Sep 2026 18:36:52 +0000</pubDate></item><item><title>Beta 240 TR34 1988 pure dirt bag.</title><link>https://www.trialscentral.com/forums/topic/85536-beta-240-tr34-1988-pure-dirt-bag/</link><description><![CDATA[<p>
	200€ rusty bike 
</p>

<p>
	<img alt="BETA TR34 1988  20260536" data-ratio="50.49" width="1024" src="https://i.servimg.com/u/f49/13/93/49/47/20260536.jpg" /></p>

<p>
	<img alt="BETA TR34 1988  20260537" data-ratio="45.02" width="1024" src="https://i.servimg.com/u/f49/13/93/49/47/20260537.jpg" /></p>

<p>
	<img alt="BETA TR34 1988  69873710" data-ratio="88.81" width="885" src="https://i.servimg.com/u/f49/13/93/49/47/69873710.jpg" /></p>
]]></description><guid isPermaLink="false">85536</guid><pubDate>Sun, 17 May 2026 11:25:44 +0000</pubDate></item><item><title>08 rev 3 250</title><link>https://www.trialscentral.com/forums/topic/85886-08-rev-3-250/</link><description><![CDATA[<p>Hi all can any one shed light on this, my 08 rev 3 250. </p><p>Previous owner had it set up like thus</p><ol><li><p>Ignition timing was fairly retarded by 5 degrees I'd guess</p></li><li><p>Needle jet is a JJJ not the JJH standard size.</p></li><li><p>Front sprocket is a 10 tooth </p></li></ol><p>Found the time due to the bottom end going and having a rebuild.</p><p>I can only guess they wanted a very soft engine.</p><p>On second note my m8 has a 2001 modle which seems to have more grunt and power than mine on a speed test he pulls way and leaves a fair gap even if we get away the same time ect. </p>]]></description><guid isPermaLink="false">85886</guid><pubDate>Fri, 11 Sep 2026 16:31:44 +0000</pubDate></item><item><title>Sincro aftermarket exhaust</title><link>https://www.trialscentral.com/forums/topic/85794-sincro-aftermarket-exhaust/</link><description><![CDATA[<p>Has anyone tried an MP titanium header on a new synchro. I’m looking to get a wee bit more bottom end out of my new 250 factory Sincro, have removed the FWW which has helped but been told the custom header improves the bottom end and sounds better too, anyone on here had any experience with it or know of someone who has?</p>]]></description><guid isPermaLink="false">85794</guid><pubDate>Thu, 03 Sep 2026 19:27:33 +0000</pubDate></item><item><title>Beta Sincro Snatchy clutch...</title><link>https://www.trialscentral.com/forums/topic/85662-beta-sincro-snatchy-clutch/</link><description><![CDATA[<p>
	Has anybody found a cure for the Sincro light-switch clutch yet? 
</p>

<p>
	I've tried several things to fix it:<br />
	1. Changing the pre- installed settings<br />
	2. Changing the oil<br />
	3. Slipping the clutch in high gear to wear it down
</p>

<p>
	Despite this, it still snatches in slow turns, so I can't keep a line in a tight corner.
</p>

<p>
	Basically, I spent £7,000 on a bike which is not as good as my old one. Absolutely gutted.
</p>
]]></description><guid isPermaLink="false">85662</guid><pubDate>Mon, 15 Jun 2026 20:28:52 +0000</pubDate></item><item><title>Beta 250 trials bike</title><link>https://www.trialscentral.com/forums/topic/85637-beta-250-trials-bike/</link><description><![CDATA[<p>
	I have a beta 250 trails bike no spark changed every part no spark now someone is saying that the stator is in the wrong place has any got a photo showing the right place it needs to be 
</p>
]]></description><guid isPermaLink="false">85637</guid><pubDate>Tue, 09 Jun 2026 19:07:49 +0000</pubDate></item><item><title>TR34 rebuild</title><link>https://www.trialscentral.com/forums/topic/63281-tr34-rebuild/</link><description><![CDATA[
<p>
	Hi all,
</p>

<p>
	There don't seem to be many rebuild threads on here of air cooled stuff,  so thought I would post some pics of my TR34.
</p>

<p>
	I have had this since it was 6 months old, and it's had a pretty easy life until I left it in a shed with a leaky roof for a couple of  years and everything corroded <img alt=":huh:" data-emoticon="" src="https://www.trialscentral.com/forums/uploads/emoticons/default_huh.png" title=":huh:" loading="lazy"></p>

<p>
	It's been a total strip down, frame,  engine, hubs, etc all repainted, and everything that was plated, replated. 
</p>

<p>
	It's been a struggle getting some of the bits, but nearly there now. I will add more pics as it progresses.
</p>

<p>
	I hope you enjoy the pics.
</p>

<p>
	Cheers, John. 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p><a href="https://www.trialscentral.com/forums/uploads/monthly_2017_03/IMG_170324_1352087-768x1365.jpg.285afd2c9f3a323ad98771aa2b8f1ed0.jpg" class="ipsAttachLink ipsAttachLink_image"><img data-fileid="20647" src="https://www.trialscentral.com/forums/uploads/monthly_2017_03/IMG_170324_1352087-768x1365.thumb.jpg.5daef0db8d45f23e92ae8b33ba42fd2e.jpg" class="ipsImage ipsImage_thumbnailed" alt="IMG_170324_1352087-768x1365.jpg" loading="lazy"></a></p>
<p><a href="https://www.trialscentral.com/forums/uploads/monthly_2017_03/IMG_170324_2149409-1024x576.jpg.4fb59987fe2d771cdc3495eed435d0a2.jpg" class="ipsAttachLink ipsAttachLink_image"><img data-fileid="20648" src="https://www.trialscentral.com/forums/uploads/monthly_2017_03/IMG_170324_2149409-1024x576.thumb.jpg.bf3b11f108e312870e7f87984abbcef6.jpg" class="ipsImage ipsImage_thumbnailed" alt="IMG_170324_2149409-1024x576.jpg" loading="lazy"></a></p>
<p><a href="https://www.trialscentral.com/forums/uploads/monthly_2017_03/IMG_170324_2150371-1024x576.jpg.9361624df459c69683f57a0c52a9afa8.jpg" class="ipsAttachLink ipsAttachLink_image"><img data-fileid="20649" src="https://www.trialscentral.com/forums/uploads/monthly_2017_03/IMG_170324_2150371-1024x576.thumb.jpg.878fec3f4175bceccb5c8486c32bfafa.jpg" class="ipsImage ipsImage_thumbnailed" alt="IMG_170324_2150371-1024x576.jpg" loading="lazy"></a></p>
<p><a href="https://www.trialscentral.com/forums/uploads/monthly_2017_03/IMG_170324_2151242-1024x576.jpg.0403594384dd13295df5a87aaf0ad481.jpg" class="ipsAttachLink ipsAttachLink_image"><img data-fileid="20650" src="https://www.trialscentral.com/forums/uploads/monthly_2017_03/IMG_170324_2151242-1024x576.thumb.jpg.d354a7450458fec5628c2aebf24e96e9.jpg" class="ipsImage ipsImage_thumbnailed" alt="IMG_170324_2151242-1024x576.jpg" loading="lazy"></a></p>]]></description><guid isPermaLink="false">63281</guid><pubDate>Mon, 20 Mar 2017 20:46:36 +0000</pubDate></item><item><title>Titanium exhaust cracked</title><link>https://www.trialscentral.com/forums/topic/85606-titanium-exhaust-cracked/</link><description><![CDATA[<p>
	Has anyone had any joy getting the titanium exhaust welded ? Mine has developed a 4 inch crack on the front pipe but can’t find a welder to do titanium welding ? Any help would be appreciated 
</p>

<p>
	<a class="ipsAttachLink ipsAttachLink_image" data-fileext="jpeg" data-fileid="33757" href="https://www.trialscentral.com/forums/uploads/monthly_2026_06/IMG_3713.jpeg.b17d2d2230c6e4b1ee962da6c527ddf8.jpeg" rel=""><img alt="IMG_3713.jpeg" class="ipsImage ipsImage_thumbnailed" data-fileid="33757" data-ratio="133.45" width="589" src="https://www.trialscentral.com/forums/uploads/monthly_2026_06/IMG_3713.thumb.jpeg.8983576fbf959fbc24f010916eeb5d74.jpeg" /></a>
</p>
]]></description><guid isPermaLink="false">85606</guid><pubDate>Wed, 03 Jun 2026 16:53:43 +0000</pubDate></item><item><title>2013 Beta EVO rear caliper seals</title><link>https://www.trialscentral.com/forums/topic/85370-2013-beta-evo-rear-caliper-seals/</link><description><![CDATA[<p>
	I got the bike out yesterday after not using it at all last year and it was generally fine but the rear brake was binding a bit so I decided to overhaul it and replace the seals.
</p>

<p>
	It appears that Beta only do a kit which includes new pistons, which I don't need - has anyone found an aftermarket supplier for the seals only?
</p>
]]></description><guid isPermaLink="false">85370</guid><pubDate>Sun, 22 Mar 2026 13:02:28 +0000</pubDate></item><item><title>That annoying thing at the bottom of the damper cartridge.</title><link>https://www.trialscentral.com/forums/topic/85601-that-annoying-thing-at-the-bottom-of-the-damper-cartridge/</link><description><![CDATA[<p>
	So I just replaced the fork seals on my 2018. And of course taking the bolt out of the bottom of the damper rod is a problem. Finally got it out with pressure, impact driver, bad words. The cup at the bottom of the damper rod showed the dimple worn allowing that piece to rotate. Hmmm. So having score marks to go by I figured I’d drill new indexing holes to give the cartridge a better chance of staying in place. So this is just FYI.
</p>

<p>
	 
</p>

<p><a href="https://www.trialscentral.com/forums/uploads/monthly_2026_06/IMG_8597.jpeg.998bc5d992d80b098363c115aea7cc47.jpeg" class="ipsAttachLink ipsAttachLink_image"><img data-fileid="33756" src="https://www.trialscentral.com/forums/uploads/monthly_2026_06/IMG_8597.thumb.jpeg.7928a024cf9eb132f0617acca8ecffad.jpeg" data-ratio="75" width="1024" class="ipsImage ipsImage_thumbnailed" alt="IMG_8597.jpeg"></a></p>
<p><a href="https://www.trialscentral.com/forums/uploads/monthly_2026_06/IMG_8603.jpeg.58040a34cb9b8f88a6709067521302ee.jpeg" class="ipsAttachLink ipsAttachLink_image"><img data-fileid="33755" src="https://www.trialscentral.com/forums/uploads/monthly_2026_06/IMG_8603.thumb.jpeg.8f38f1d92a1d238aa32f80ba5749e72b.jpeg" data-ratio="133.45" width="589" class="ipsImage ipsImage_thumbnailed" alt="IMG_8603.jpeg"></a></p>
<p><a href="https://www.trialscentral.com/forums/uploads/monthly_2026_06/IMG_8604.jpeg.40f9ffafadcc060aaa9682af1c93c9b5.jpeg" class="ipsAttachLink ipsAttachLink_image"><img data-fileid="33754" src="https://www.trialscentral.com/forums/uploads/monthly_2026_06/IMG_8604.thumb.jpeg.240fc4c33ab3fd938f1a637925150713.jpeg" data-ratio="133.45" width="589" class="ipsImage ipsImage_thumbnailed" alt="IMG_8604.jpeg"></a></p>
<p><a href="https://www.trialscentral.com/forums/uploads/monthly_2026_06/IMG_8598.jpeg.6c6f3f22ec3a1850ac2cda5b9f43b097.jpeg" class="ipsAttachLink ipsAttachLink_image"><img data-fileid="33753" src="https://www.trialscentral.com/forums/uploads/monthly_2026_06/IMG_8598.thumb.jpeg.b89572409626855cff4914edd7303514.jpeg" data-ratio="75" width="1024" class="ipsImage ipsImage_thumbnailed" alt="IMG_8598.jpeg"></a></p>]]></description><guid isPermaLink="false">85601</guid><pubDate>Wed, 03 Jun 2026 01:04:01 +0000</pubDate></item><item><title>Crank case markings</title><link>https://www.trialscentral.com/forums/topic/85582-crank-case-markings/</link><description><![CDATA[<p>
	Got my 08 rev 3 250 apart for new mains and crank. After splitting the cases I found markings engraved 1064. Does any one know what this would have been done for. 
</p>

<p>
	Its obviously the engine has been apart before as the new mains uv had are the plastic caged ones direct from beta.
</p>

<p>
	 
</p>

<p>
	Old bearings were ntn.
</p>

<p><a href="https://www.trialscentral.com/forums/uploads/monthly_2026_05/20260530_112409.jpg.abcc8de772c26d87d90d488f51accc22.jpg" class="ipsAttachLink ipsAttachLink_image"><img data-fileid="33749" src="https://www.trialscentral.com/forums/uploads/monthly_2026_05/20260530_112409.thumb.jpg.8d6d76a4a11d26af23083671a4769aae.jpg" data-ratio="133.45" width="589" class="ipsImage ipsImage_thumbnailed" alt="20260530_112409.jpg"></a></p>
<p><a href="https://www.trialscentral.com/forums/uploads/monthly_2026_05/20260530_145245.jpg.1b90847e828871c8d7147e8e64d5093e.jpg" class="ipsAttachLink ipsAttachLink_image"><img data-fileid="33748" src="https://www.trialscentral.com/forums/uploads/monthly_2026_05/20260530_145245.jpg.1b90847e828871c8d7147e8e64d5093e.jpg" data-ratio="75" width="16320" class="ipsImage ipsImage_thumbnailed" alt="20260530_145245.jpg"></a></p>]]></description><guid isPermaLink="false">85582</guid><pubDate>Sat, 30 May 2026 19:07:42 +0000</pubDate></item><item><title>Beta evo80 carb idle issue</title><link>https://www.trialscentral.com/forums/topic/85592-beta-evo80-carb-idle-issue/</link><description><![CDATA[<p>
	Hi so I just picked up a 2018 evo80 Jr for my son.. bought it off the original owner who son rode it twice and never again and it has maybe 8hrs on it  .. it had sat for atleast 4 years it wouldn't idle at all when we went to look at it and pulled the carb off and cleaned it all out and it runs much better but still is struggling idling for any period of time and stalls out  . Ive played with the mixture screw and had varying results and it seems to run better for abit then not .. it runs great off idle so im not sure where to go with it ...plug looks good . Fuel supply is good. Airfilter is freshly cleaned and oiled. Im wondering if maybe its a jetting issue ? We are below 1000 ft from sea level ... carburetors are not my strong suit lol
</p>

<p>
	Cheers 
</p>
]]></description><guid isPermaLink="false">85592</guid><pubDate>Mon, 01 Jun 2026 04:06:46 +0000</pubDate></item></channel></rss>
