<?xml version="1.0"?>
<rss version="2.0"><channel><title>Vertigo Latest Topics</title><link>https://www.trialscentral.com/forums/forum/96-vertigo/</link><description>Vertigo Latest Topics</description><language>en</language><item><title>Footpegs for a Nitro 250 2022.</title><link>https://www.trialscentral.com/forums/topic/85410-footpegs-for-a-nitro-250-2022/</link><description><![CDATA[<p>
	I need new footpegs  for a Vertigo Nitro 250 2022. Any recommendations?
</p>
]]></description><guid isPermaLink="false">85410</guid><pubDate>Fri, 03 Apr 2026 09:55:52 +0000</pubDate></item><item><title>2024 nitro 300 Spark Plug</title><link>https://www.trialscentral.com/forums/topic/84284-2024-nitro-300-spark-plug/</link><description><![CDATA[<p>
	Hello all, I've just bought a 2024 nitro 300. What spark plug should I run as I was told in my 2018 vertigo to run the hotter BPMR4A rather than the BPMR6A. Do you still need to do this on the newer bikes?
</p>

<p>
	Many thanks 
</p>
]]></description><guid isPermaLink="false">84284</guid><pubDate>Tue, 02 Sep 2025 21:21:11 +0000</pubDate></item><item><title>2022 Vertigo Nitro, cold start issue</title><link>https://www.trialscentral.com/forums/topic/84776-2022-vertigo-nitro-cold-start-issue/</link><description><![CDATA[<p>
	My 2022 Vertigo Nitro JB replica with battery, is extremely difficult to start. As the temperature drops more kicks are required to start it. In the garage at 10c it took 70 kicks to start it. 
</p>

<p>
	Battery is good 13.3 volts, throttle body just cleaned and mass air flow cleaned, new plug.   Took so long I thought it was broken. Suggestions please.
</p>
]]></description><guid isPermaLink="false">84776</guid><pubDate>Mon, 08 Dec 2025 03:24:43 +0000</pubDate></item><item><title>Problems launching Vertigo Vertical Works 2019</title><link>https://www.trialscentral.com/forums/topic/84743-problems-launching-vertigo-vertical-works-2019/</link><description><![CDATA[<p dir="ltr">
	Hello, could you tell me what could be the problem with starting a cold engine? I have to put the bike on a stand and kick it as hard as I can about 20 times. After starting, the bike starts right after turning off the engine, but if it sits for 2 minutes, it is very difficult to start again, sometimes even impossible. The bike has a lot of mileage (about 1000 engine hours). After purchasing it from the previous owner, I replaced the fuel filter, fuel pump, injector, hose clamps in the gas tank, ignition coil and condenser in an attempt to find the problem. After that, everything got better, but the problem remains. Direct fuel injection into the intake manifold helps; in this case, it starts every time. I read all the threads on the forum and came to the conclusion that the problem could be in the crankshaft seals or sensors. I have seen people installing small batteries in the filter block, but I'm not sure which wires to connect them to?  To the capacitor or to the battery connector, which should be under the seat? I think this option should help, I'd be grateful for any help.
</p>
]]></description><guid isPermaLink="false">84743</guid><pubDate>Sun, 30 Nov 2025 23:01:08 +0000</pubDate></item><item><title>Service manual?</title><link>https://www.trialscentral.com/forums/topic/72765-service-manual/</link><description><![CDATA[
<p>
	I did some searching, but didn’t see any answer.  Is there any sort of Service Manual available for the Vertigo?
</p>

<p>
	software for the FI with diagnostics etc?
</p>
]]></description><guid isPermaLink="false">72765</guid><pubDate>Fri, 29 May 2020 19:37:47 +0000</pubDate></item><item><title>2016 Vertigo 300 capacitor</title><link>https://www.trialscentral.com/forums/topic/84119-2016-vertigo-300-capacitor/</link><description><![CDATA[<p>
	Hi can anyone advise how to test this capacitor from a 2016 Vertigo (it’s got the batteryless upgrade). I can use a multimeter and read micro farads etc, I just don’t know the valves I should see (there are 3 pins, nothing written on the unit). Also would this being faulty cause failure to start (definitely no spark) ?<a class="ipsAttachLink ipsAttachLink_image" href="https://www.trialscentral.com/forums/uploads/monthly_2025_08/657CB8CE-9C09-428D-8F01-1A71045C88C8.jpeg.776e1157626a72fb14b99f95ae19398b.jpeg" data-fileid="33430" data-fileext="jpeg" rel=""><img class="ipsImage ipsImage_thumbnailed" data-fileid="33430" data-ratio="56.25" width="1024" alt="657CB8CE-9C09-428D-8F01-1A71045C88C8.thumb.jpeg.eb17d5953d0369b40addd257489b51ff.jpeg" src="https://www.trialscentral.com/forums/uploads/monthly_2025_08/657CB8CE-9C09-428D-8F01-1A71045C88C8.thumb.jpeg.eb17d5953d0369b40addd257489b51ff.jpeg" /></a>
</p>
]]></description><guid isPermaLink="false">84119</guid><pubDate>Sun, 10 Aug 2025 17:56:28 +0000</pubDate></item><item><title>2016 vertigo 300 won&#x2019;t start</title><link>https://www.trialscentral.com/forums/topic/84019-2016-vertigo-300-won%E2%80%99t-start/</link><description><![CDATA[<p>
	Hi I’ve just bought a 2016 combat 300 that won’t currently start (bought with an intermittent starting issue). What does the powerbox part number V-0533 do within the ignition system?
</p>

<p>
	thanks
</p>
]]></description><guid isPermaLink="false">84019</guid><pubDate>Sun, 27 Jul 2025 15:09:20 +0000</pubDate></item><item><title>Issue with Kickstart Shaft and Lever</title><link>https://www.trialscentral.com/forums/topic/83922-issue-with-kickstart-shaft-and-lever/</link><description><![CDATA[<p>
	Is this kickstart shaft the same as V-0231 – KICKSTART SHAFT? I'm having trouble getting the parts to fit together properly. My bike is a <strong>2019 Vertigo Vertical Combat 250cc</strong>, and I'm using the original Vertigo kickstart lever. However, I can't seem to get it to fit correctly onto the shaft. I was expecting there to be a groove or slot in the shaft for the cross bolt on the lever to lock into, but it doesn't seem to be there.
</p>

<p><a href="https://www.trialscentral.com/forums/uploads/monthly_2025_07/IMG_8287.jpg.b303eaa309a9009e09de73567bf6aa95.jpg" class="ipsAttachLink ipsAttachLink_image"><img data-fileid="33413" src="https://www.trialscentral.com/forums/uploads/monthly_2025_07/IMG_8287.thumb.jpg.aa1898d8e45d3c279607b1f4b4345454.jpg" data-ratio="63.96" width="1024" class="ipsImage ipsImage_thumbnailed" alt="IMG_8287.jpg"></a></p>]]></description><guid isPermaLink="false">83922</guid><pubDate>Thu, 17 Jul 2025 17:34:13 +0000</pubDate></item><item><title>Fork Oil Level</title><link>https://www.trialscentral.com/forums/topic/83914-fork-oil-level/</link><description><![CDATA[<p>
	I'm new here and have just bought a used 2019 Vertigo Combat Vertical 250cc.
</p>

<p>
	I'm about to change the oil in both front forks, but I'm a bit unsure about the correct oil level. In the service manual for the bike, it says the oil level should be 130 mm in both forks. However, in the service manual for the forks — which are Tech Suspension — it states that the level should be 130 mm in the left fork and 75 mm in the right.
</p>

<p>
	Which one should I trust?
</p>
]]></description><guid isPermaLink="false">83914</guid><pubDate>Wed, 16 Jul 2025 17:12:13 +0000</pubDate></item><item><title>Vertigo busto start poorly</title><link>https://www.trialscentral.com/forums/topic/79159-vertigo-busto-start-poorly/</link><description><![CDATA[<pre dir="ltr" style="background-color:#f8f9fa;border:none;color:#1f1f1f;font-size:24px;padding:10px .14em 10px 0px;text-align:left;"><span lang="en" xml:lang="en">Hello everyone, I submit my problem to you. My Vertigo Busto 2021 250cc motorcycle starts poorly when cold or hot. He needs at least two kicks each time. In the long run it's painful. have you ever had this type of problem?
thanks in advance</span></pre>
]]></description><guid isPermaLink="false">79159</guid><pubDate>Sat, 09 Mar 2024 13:20:51 +0000</pubDate></item><item><title>Vertigo hot start problems</title><link>https://www.trialscentral.com/forums/topic/73023-vertigo-hot-start-problems/</link><description><![CDATA[
<p>
	Hi guys, was my first outing today on the vertigo r2 250cc 2020 model. First owner...ive noticed sometimes more than other takes about 10 kicks to start when hot? Is there a knack to starting throttle positions? Any help be great, I will obviously call dealer also 
</p>
]]></description><guid isPermaLink="false">73023</guid><pubDate>Sun, 12 Jul 2020 20:17:01 +0000</pubDate></item><item><title>Vertigo SOLD</title><link>https://www.trialscentral.com/forums/topic/82620-vertigo-sold/</link><description><![CDATA[<p>
	A Chinese motorcycle brand has bought Vertigo and it will be run in Europe by Marc Colomer and Xiu. 
</p>
]]></description><guid isPermaLink="false">82620</guid><pubDate>Fri, 17 Jan 2025 16:38:10 +0000</pubDate></item><item><title>Vertigo dl12 300</title><link>https://www.trialscentral.com/forums/topic/82029-vertigo-dl12-300/</link><description><![CDATA[<p>
	Hi I've just got the above bike a 2018 model and I'm finding it difficult to get started. I've ordered a new air and fuel filter in the hope that this could help. The only times I've had it started I had to squirt a syringe of premix down the throttle body but I can't be doing that all the time <span class="ipsEmoji">😂</span>
</p>

<p>
	Does it sound like a fuel filter problem or pump problem to you guys. I don't think it helps that I got the 300cc version and I'm only 156lbs. But it was road registered and in pretty good condition.
</p>

<p>
	Thanks guys <span class="ipsEmoji">😊</span><span class="ipsEmoji">👍</span><span class="ipsEmoji">👍</span>
</p>

<p>
	Martin 
</p>

<p>
	<a class="ipsAttachLink ipsAttachLink_image" href="https://www.trialscentral.com/forums/uploads/monthly_2024_11/Screenshot_20241105-224114.png.a7527ca8a1d24960ef1d2e6acf6266e6.png" data-fileid="33010" data-fileext="png" rel=""><img alt="Screenshot_20241105-224114.png" class="ipsImage ipsImage_thumbnailed" data-fileid="33010" data-ratio="134.13" width="586" src="https://www.trialscentral.com/forums/uploads/monthly_2024_11/Screenshot_20241105-224114.thumb.png.315f05f285d4506909e35011ace92664.png" /></a>
</p>
]]></description><guid isPermaLink="false">82029</guid><pubDate>Fri, 08 Nov 2024 15:53:59 +0000</pubDate></item><item><title>How to adjust idle?</title><link>https://www.trialscentral.com/forums/topic/74803-how-to-adjust-idle/</link><description><![CDATA[<p>
	I know how to adjust carb, but there is no idle screw on Vertigo <span class="ipsEmoji">🙄</span>
</p>

<p>
	Idle speed is to low and it is stall regularly
</p>]]></description><guid isPermaLink="false">74803</guid><pubDate>Thu, 24 Jun 2021 16:38:40 +0000</pubDate></item><item><title>TPS SENSOR</title><link>https://www.trialscentral.com/forums/topic/80888-tps-sensor/</link><description><![CDATA[<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">Hello everyone,</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">I have a problem again with my Vertigo Busto 2021 250cc and I can't find the solution.</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">I would like to post the problem to see if you have a solution.</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">Some time ago, I had fueling problems during training. Thinking that dirt had gotten into the air screw of the injection body, I dismantled the injection body.</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">I noticed that the tps sensor was free with the screw loosened..</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">Since then, it's been a mess!</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">The motorcycle starts cold but rattles and smokes abnormally then when hot it stops by itself.</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">Here's what I did:</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">TPS Replacement</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">TPS recalibration</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">----------The problem remains the same------</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">Checking the connections, checking the coolant level and pump operation, swapping the ignition coil with my brother's motorcycle</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">I have no results The bike always stalls hot <img alt=":(" data-emoticon="" height="20" src="https://www.trialscentral.com/forums/uploads/emoticons/default_sad.png" srcset="https://www.trialscentral.com/forums/uploads/emoticons/sad@2x.png 2x" title=":(" width="20" /></span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">My WIFICOM does not indicate any fault</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">What do you think?</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">When I changed the TPS, I did the replacement without doing any tilt adjustment, just a calibration afterwards. do you think it's good?</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">Thanks in advance</span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en"> </span>
</p>

<p>
	<span lang="en" style="color:#1f1f1f;font-size:21pt;" xml:lang="en">3 weeks since I rode............</span>
</p>

<p>
	 
</p>
]]></description><guid isPermaLink="false">80888</guid><pubDate>Mon, 05 Aug 2024 19:42:32 +0000</pubDate></item><item><title>Vertigo kickstart</title><link>https://www.trialscentral.com/forums/topic/80909-vertigo-kickstart/</link><description><![CDATA[<p>
	Hi guys , just replacing the kickstart assembly on my vertigo vertical, and can't get the kickstart to return, do I need to take the clutch off for re assembly, did it about 2 yrs ago but can't remember what I did 
</p>
]]></description><guid isPermaLink="false">80909</guid><pubDate>Tue, 06 Aug 2024 19:11:42 +0000</pubDate></item><item><title>hot start problem fixed</title><link>https://www.trialscentral.com/forums/topic/80163-hot-start-problem-fixed/</link><description><![CDATA[<p>
	Hy,
</p>

<p>
	maybe anybody has the same problem. My Vertigo R3 MY 2021 starts poorly when hot. When the fan was running and the engine was off longer than about 15sec. it fires up very poorly. The problem was the capacitor and the cables which look like this:
</p>

<p>
	<span></span><a class="ipsAttachLink ipsAttachLink_image" href="https://www.trialscentral.com/forums/uploads/monthly_2024_06/image0.jpeg.4de1af99d95c78d21bb408a24f66c8be.jpeg" data-fileid="32549" data-fileext="jpeg" rel=""><img class="ipsImage ipsImage_thumbnailed" data-fileid="32549" data-ratio="133.45" width="589" alt="image0.thumb.jpeg.1efb69f69b091a8685e893f0bbeb9852.jpeg" src="https://www.trialscentral.com/forums/uploads/monthly_2024_06/image0.thumb.jpeg.1efb69f69b091a8685e893f0bbeb9852.jpeg" /></a>
</p>

<p>
	hope this helps anyone
</p>

<p>
	 
</p>

<p>
	BR M
</p>

<p>
	 
</p>
]]></description><guid isPermaLink="false">80163</guid><pubDate>Mon, 03 Jun 2024 09:00:25 +0000</pubDate></item><item><title>Wiring Diagramm Vertigo R3</title><link>https://www.trialscentral.com/forums/topic/79912-wiring-diagramm-vertigo-r3/</link><description><![CDATA[<p>
	Hello,
</p>

<p>
	i´m searching for a wiring diagramm for my Vertigo R3 300ccm year 2021. Has anybody a idea where i could get this please? I hope someone can help me.
</p>

<p>
	 
</p>

<p>
	thanks for information and br
</p>
]]></description><guid isPermaLink="false">79912</guid><pubDate>Tue, 14 May 2024 19:16:05 +0000</pubDate></item><item><title>Nitro 2022 Battery</title><link>https://www.trialscentral.com/forums/topic/77570-nitro-2022-battery/</link><description><![CDATA[<p>
	I've just been cleaning my nitro's battery compartment and pressed the test button on the battery and theres no lights on...
</p>

<p>
	With never owning one before I would imagine that the battery should hold some charge? and any ideas or how to diagnose what the problem is?
</p>

<p>
	Anyone got any experience in this as there's absolutely diddly about it in the manual or online about it
</p>

<p>
	Thanks in advance
</p>

<p>
	Mick
</p>
]]></description><guid isPermaLink="false">77570</guid><pubDate>Sun, 09 Apr 2023 17:39:50 +0000</pubDate></item><item><title>Vertigo 2020 fan on constantly</title><link>https://www.trialscentral.com/forums/topic/78785-vertigo-2020-fan-on-constantly/</link><description><![CDATA[<p>
	Fan was on constantly on last ride out.Coolant checked.Attached my GET WiFi reader and it showed nothing.Except fan control was blocked out?Temperature sensor read open circuit for resistance between ground and terminal with wire disconnected?Seemed to be cutting in and out tonight when testing?Anyone seen this before of any ideas?
</p>

<p>
	<a class="ipsAttachLink ipsAttachLink_image" data-fileext="png" data-fileid="32150" href="https://www.trialscentral.com/forums/uploads/monthly_2024_01/IMG_9990.png.4fd1e3569f8188623e36c9a273e4b4f6.png" rel=""><img alt="IMG_9990.png" class="ipsImage ipsImage_thumbnailed" data-fileid="32150" data-ratio="216.53" width="363" src="https://www.trialscentral.com/forums/uploads/monthly_2024_01/IMG_9990.thumb.png.ec0d9ac85814f9ca3e8e5d603efe9382.png" /></a>
</p>
]]></description><guid isPermaLink="false">78785</guid><pubDate>Tue, 30 Jan 2024 20:24:31 +0000</pubDate></item></channel></rss>
