Jump to content

300factorybeta4t

Members
  • Posts

    23
  • Joined

  • Last visited

Posts posted by 300factorybeta4t
 
 
  1. For your weight you should run 300cc of 5wt suspension fluid in each leg. Make sure the spring preload is wound right off and then have a play with the rebound damping to suit.

  2. O.K> I,m at work and can get on internet. I can take a carb off a good running 4t, with out an over flow issue put it on my bike it over flows. My bike runs great with any of the three carbs that I have,but they all over flow. Only work done was 300 kit. At first bike would start then die. thats why I started re-checking the work that was done everything looks good so I started changing carbs.
  3. Before going to the expense of master cylinders etc try removing and checking the pedal pivot bolt. As it gets worn it gets a high spot which causes the brake pedal to momentarily lock down. It's probably happened more than you've realised! When the bolt and pivot bush is out give them a good clean and put the bolt back with some loctite and some light grease on the pivot, don't overtighten it. Once you get in the habit of doing this as part of your service routine you won't have the problem again.

 
×
  • Create New...