Jump to content

bondy

Members
  • Posts

    1,791
  • Joined

  • Last visited

Posts posted by bondy
 
 
  1. Ok I have sorted it now I've took it out and refitted it and all is good god knows what was the problem but looks like I've sorted it I have also done a good few off the TY 80s never had this before so thanks for replies cheers 

  2. Hello am restoring a Ty 80 I've had a new con rod pressed in and balanced it came without thrush washers now I've put it together when I put the 2 crank cases together and nip up the crack is stiff and will harden move without force i have built many off same engine without fault the only difference being all had thrush washers in as any 1 any idea what else it could be as I've done everything correct main bearing fully home so in my mind it can't be anything else or am i missing something apart from the thrush washers TA 

  3. Hello can any 1 tell me the silencer on the TR77 250 dose it need the packing? I cant get into it dose it need to be cut open? I just want to make sure because its not my bike as am doing some work on it cheers.

  4. Hello can any 1 Help I have a Ty 175 that ive just restored the Engine as had new piston the rest was ok ive started it up runs fine but when I put it into gear it jumped forward and stalled so am assuming its the clutch. it was fine  before  but its been stood for a long time could it be the clutch plates stuck together may need a clean? the only thing I did was to take the clutch Arm out to clean and put it back the grub screw that screws into the clutch Arm could this have anything to do with the clutch nor working? any help would be much appreciated.

  5. Hi yes I did blow the tube up slightly ive had the tube out twice now it is a very old tube I have ordered a new 1 not that makes a difference I will have to be Exra carful when I put the new tube in I will soap the tyre up this time to make it to go on a little easer its one off those jobs am not fund off doing but has to be done I do have a spare wheel off a donner bike with a good tyre already on it I can put that on until I sort the other wheel cheers chris.

  6. Hello has any 1 got any tips on how to put the ty 80 rear tyre on daft question am use to putting the big full size ones on  but this 1 is very hard to get on I have it on the rim problem is I keep nipping the inner tube any help would be good thanks chris.

  7. Hello can any 1 tell me how the ty 80 forks get  put together I have a rough idea but I want to know dose the tube get held in with the bushes? the rod is just held in with the screw hat the bottom dose the rod in any way get fastened to the tube? cheers,

  8. Hello All this may be a daft question but on the top off the fork tubes just under the top yoke there is only what I can describe as a small groove looks like a Letter C or like a small thumb nail any 1 any idea why these are there? 1 each tube. ?

 
×
  • Create New...