ady witting

Hi, I have a TY250 mono with a pro monty front pipe and sammy miller back box and rebored to 261cc with wossner piston, just wondering if there is a carb upgrade from the original as can not get it to run right always running on when it gets hot tried cleaning carb out I have left jetting as it was. If there is a carb upgrade where to buy one from

Hi just wondering if this years event has been cancelled due to Covid-19 as Trial GP website doesn't but World Trial 2020 website does say its cancelled

Hi everyone just wondering does anyone know which club is organising the event as we would like to observe.

Hi re3vste, My dad Is the clerk of the course for Scunthorpe Club trial on Sunday and the white route is a beginners route which will suit you any questions message me

Hi there i have a 2016 300 with a Keihin Carb and 48 Pilot Jet and 128 main jet standard needle and needle set in middle and air screw at 1 1/2 turns out, but it seems to run on slightly sometimes i am thinking its running weak

Yes you should be able to ride around before the start but not the sections. I would take 1 can of petrol with you. If you come and see us there we will sort you out and my dad will run the bike with you. We are in a big Blue Renault Master with Holmestead on the side of it. (Reg EY08 DCE) We will be there from about 9 - 9.30 ish. it starts at 10.30/ 11am .

Hi, Yes you can have a bit of practice before the trial once u have got entered but not the sections, usually we get the 1 hour before the start

I've just changed my carb settings now, left the pilot jet at 45, changed the main jet from a 125 to a 128 and needle setting to 1 up from bottom, going to try this setting at trial on Sunday (Lincoln). hopefully this setting should be ok.

Hi, Lincoln have a Trial Next Sunday 10th Jan at Manton Quarry Nr Scunthorpe (DN21 4JT) Scunthorpe have one on 17th Jan Next to Eddie Wright Speedway Stadium (DN15 8QZ) Banovallum have one on 24th Jan at South Thorseby Quarry Nr Louth (LN13 0AW) Pegasus have one on 31st Jan at Castle Bytham South of Grantham off the A1. (NG33 4QW) The Easy Route at all these Events is very suitable for a Beginner, and will all make you welcome Have a Look at the Link below which gives you all this year trials and dates around this area http://www.motorcyclesport.org.uk/trials_dates.htm

Thanks Guys for all your comments. Will take your advice

Does anyone know what jets I should be running on my carb its a kelhin flat slide

I was going to get a 250 but I tried a 300 at demo day, and thought it suited me more, they are easy to ride, good on power. if I was you I would go for a 300 but try it first

Thanks to all your comments guys, I am blaming myself Scott lol

Hi, I've just bought a 2016 300cc and I was wondering what the mixture screw turns should be so its set right for me its a kelhin flat slide carb on it

Hi There. I have fitted 1 to my 2011 sherco and all you have to do is extend the wires, the wires on the end of the switch need to be male, 1 to earth, the other 1 to the cdi wire which is a cut out wire.