Jump to content

twinshockdude

Members
  • Posts

    290
  • Joined

  • Last visited

Contact Methods

  • Website URL
    http://
  • ICQ
    0
Contact Information
 
   
Recent Profile Visitors
 
 
8,610 profile views
 
  1. 0.2mm = 0.008" dont worry about it !
  2. do not do this ! the 2016 125 is already weak on the main jet,sherco team bikes are running a larger main than standard. they are rich on the needle,they need to be used hard to keep them clear you could drop the needle half a notch with a needle spacer/washer I think splat shop sells them
  3. try paul Curtis at PRC FABRICATIONS in leicestershire
  4. sheared ignition rotor key
  5. does anyone know what year beta started using magnesium alloy crank cases ? I mean standard for sale bikes not factory specials.
  6. if your spark plug is sooty you need to drop the needle,one notch may be too much.you can buy a spacer from splat shop which makes half a notch adjustment possible,the mixture screw only affects the first part of throttle opening.
  7. check the carb to reed block rubber for cracks,or crank seals !
  8. It was a great day,even the rain couldn`t spoil the fun ! obviously lots of work went into organizing the test day great stuff !!
  9. we had the same,it was a dodgy fuel tap - put it on reserve !
  10. we have had a `15 no problems other than rider inflicted damage ! never broken a radiator. waiting for the 2016 to arrive.pm me if you are interested in our 2015 bike
  11. sounds ok seems to have a lot of induction noise - is there an air filter fitted ? in good condition ? pull the clutch in and most of the mechanical noise will go away.
×
  • Create New...