bashplate

I think the late 70's early 80's, 4 valve XL 250 pistons fit no problem.

had a classic trial at the weekend....forks were brilliant, thank you IN MOTION for great service.

Parts arrived today, look good.....will fit tommorow. Super fast service from In Motion.😃

Thanks everyone, parts are now ordered.

Thanks Old Geezer, I had heard they were a good source for trials parts.....nice to have conformation.

Hi everyone, this post is in Honda too......looking for new fork tubes for my TLR200 and found some at IN MOTION in the UK. They do other 70'/80's bikes too.....Anybody tried them?

Hi folks, tubes are toast, so did a search for suppliers for new, not many out there but found some at a good price at IN MOTION in UK. Anybody tied them?, I see they do Bulto and KT's too. I'm in NZ.

Hi Titch, just been and measured a pair I have in the shed, they are 565mm long. Are you hoping to find some off a later bike with 30mm daimeter stanchions to fit the TYsliders? as I don't think the originals are available any more.

yes had a similar problem with a 175, the wee o ring did the trick.

nice work there buddy. I built a trials bike out of a xl200r about 10 years ago, as regards the suspension, I just backed all the settings to as soft as they would go and it worked realy well.

Hi Fordi, always buy mine from UK. They are cheep, but the cartage is high, so best to get a few sets as they weigh bugger all. You'll then have spares or some to sell on and cover some costs.

Thanks Bmonk, I'll grab 1 when the dealer opens in New Year.....or will any 'o' ring the right size stand up to the fuel?

Yeh, does it hot or cold. If turn throttle gently in lower gears up to 1/4 open, then motor revs cleanly, but go any more and will balk.

Hey 175 guru's, just getting a 1976 up and running again. Starts first kick and ticks over like a swiss watch....but open throttle past 1/4 and it just dies out. Is this the classic "o" ring around the main jet problem, or something else. Carb has been stripped and carbie clean/airline blown out.