Thankyou,The original was lightly greased.I carefully cleaned everything and installed a NEW gasket with Yamabond to try and eliminate the possibility of a leak there.Still leaking.I’m suspecting some porosity as I have found two tiny pinholes in that leak in the casting itself since posting this. Thanks!🙂
Any of have experience with an air leak like this on a 4spd Bultaco ,base of the cylinder, I’ve already replaced the gasket with fresh yamabond to little improvement.5psi drops to 1psi in 5 minutes.Thanks!🙂
So , as original Mahle piston pin clips are getting a little thin on the ground at my house,have any of you guys found any user friendly easy to obtain modern replacements? For the 250 and 350?id like to stock up.Thanks! 🙂👍
Asking for a friend...for those who by necessity or design choose to install a mikuni carb on an earlier Alpina or Sherpa T what have you found to adapt the airbox side 1.75"o.d. carb flange to the 2" i.d. rubber airbox intake hose ?Thanks Alpthusiast?
Thankyou,so is the 124/125 considered the later style?Was there a running change to that frame or am I thinking of the the 92? I wondered if the one on the right was for an earlier one with the horizontal muffler or? Thanks again ! ??
I am from the USA and I am seeking some information regarding the Homerlight tanks as fitted to your U.K. Sherpa T's. In the photo's below can you tell me what the differences in the right side panels are for. That is which tank fits what? The tank on the left has straight side panels and the one on the right has an outward bulge.
Greetings,the 165 and the 187 are the same bike essentially I don't know About any Sherpa T interchangeability Many exhausts look the same but are slightly different . 165 or 187... Best wishes Alpthusiast ?
Bultaco 4spd air leak
in Bultaco
Posted
Thankyou,The original was lightly greased.I carefully cleaned everything and installed a NEW gasket with Yamabond to try and eliminate the possibility of a leak there.Still leaking.I’m suspecting some porosity as I have found two tiny pinholes in that leak in the casting itself since posting this. Thanks!🙂