Jump to content

malcolm

Members
  • Posts

    138
  • Joined

  • Last visited

Everything posted by malcolm
 
 
  1. Does anybody know if the exhaust from a 1993 Contact will fit a txt 2000. Cheers.
  2. Thanks all, you're comments are pretty much what I thought.
  3. Any opinions on what is the best and most reliable 2015 and new trials bike?
  4. Sherco 125 2015. Just wondering how important it is to tighten the clutch centre nut to the coerce torque. Or is it ok to just tighten it. I had marked its position in relation to the shaft but it got rubbed off. Cheers.
  5. malcolm

    Sherco 125 2015

    Thanks Shazsfan. Malcolm
  6. Thanks Shazsfan. How do I replace the spring?
  7. Thanks, was out looking at the bike again this morning. Gear lever not hitting anything. It shifts in to 1 st and 2 nd no problem, but I noticed that if, when in 2nd, I push the lever down half a click it will then shift up to 3rd. Same procedure seems to work to select 4th and 5th gears. It seems to shift down the gears no problem. Does this description fit in with the advice in the above replies?
  8. Sherco 125 2015. All of a sudden unable to select 3rd gear, 4th or 5th gear. 1st and 2nd, no problem. No obvious problem, noises. Any ideas appreciated? Thanks.
  9. malcolm

    Sherco 125 2015

    Son was riding his bike and all of a sudden could not select 3rd gear. Can select 1st and 2nd no problem. No rattles or anything obvious. The gear shift lever just won't move past 2nd gear. Any thoughts on what might be wrong? Cheers.
  10. I have a 2015 125 Sherco here which usually runs fine , untill I was out riding yesterday and a strange crunching noise began to come from the front sprocket area, however this only occurs when I pull in the clutch in gear and attempt to push the bike forward. This also happens when I use the engine brake. Can anybody help or suggest what may be wrong ?
  11. malcolm

    Thermostat

    Thanks bilks. Are they generally set to switch on the fan circuit at a simulator temp?
  12. malcolm

    Thermostat

    Just wondering if all thermostats for a 125cc trials bike activate the fan at similar temperatures. I have a Sherco 125 2015 and wondered if a thermostat from another bike would be suitable, or are all thermostats specific to the bike they are fitted.
  13. Looking to put new graphics on my Sherco 125 2006. Just wondering if decals from other years would fit. Cheers
  14. Any opinions about this bike? Cheers.
  15. Looking for a spare rear wheel for a 2013 Evo 125. Does exactly the hub have to be from another Beta or are they generally all the same size? Thanks.
  16. malcolm

    Footpegs

    Just wondering, what are the best foot pegs?
  17. malcolm

    Beta 125 Evo

    Thanks, my son finds the bike lacks power/torque at lower revs.
  18. malcolm

    Beta 125 Evo

    Just wondering what difference it would make to add a weight to the stator flywheel on my sons 125 evo. Thanks
  19. malcolm

    New Chain

    Thanks for the advice. How tight should the chain be.
  20. malcolm

    New Chain

    Just fitted a new chain to my beta evo 125. It seems very loose even with the snail cams at their longest setting. Are chains sold at a standard length for the buyer to remove links as required or should I wait until the chain has stretched a little until I remove a link. What's the worst that can happen with a loose chain?
 
×
  • Create New...