|
-
Hi Guys
Can someone measure the front front length ( from Axle bolt till the top yoke ) for standard trialing fork.
Thanks & Regards
-
@teamferret
good idea. i will look around . Thanks
-
Thanks @section swept @ourian @potto @2stroke4stroke @faussy
you guys are spot on .. it seems like suzuki DR200 etc , i got them for some part exchange. i would like to use them if possible. i have another drum brake wheel as well
if i want to use it on bantam . i would like to lower them a bit. i think they still very high for trials bike.
thanks again for your quick help
Regards
-
@motovita
do you mean they are from Enduro ? i want to use with bsa bantam frame.
i will have a look again .. Thanks
-
Hi Guys
Can someone identify these forks. make/model etc ?
seems bit longer is length.
thanks & Regards
-
Never rode all twinshocks , just curious what is the best twinshock bike frame geometry/handling wise..
Yamaha TY
Suzuki Beamish
Fantic 200
Kawasaki KT
Bultaco
Montesa Cota
Ossa MAR
Honda TL
may be more. you can suggest .
Regards
-
i think in 5-10 years 3D printing will mature and cheap and i will print off my favorite motorcycles without running the factory
-
i might be more biased towards older bikes. but i still believe olders bikes were different from ground up ( frame, engine , sounds ) were distinctive , FB and james shared Villiers engine
i agree everyone have its own taste and liking , and i respect that.
-
I mean to say if they will be production again. i agree the Twinshock have good turnout , but their prices are increasing rapidly and becoming collectible items.
-
Hi
Will twinhocks bikes will come back ?. I love the older british bikes since childhood
i can see lot of British manufactures are making the bikes again ( Triumph, Norton Brough Superior etc ) ,
i like the newer models .. but they are missing the character , most of them look the same. Sorry my opinion only.
Regards
-
Thanks for all your suggestions/ideas .
@turbohead
very impressive work. how to make tank pattern first from wood block . ?
-
Hi guys
I was looking for affordable alloy petrol tank for royal enfield bullet project
i dont mind ordering it from any part of world as long as it reach my dirty hands.
Any idea ?
Regards
-
I found the copy of old Royal Enfield scrambler & Trials brochure on internet, feel like sharing it.
good to know the specs of the bikes in those days.
-
-
Hi Guys
I have recently purchased on ebay ( 1.85 x 21 Inch ) Front RIM with 40 holes. it looks bit more wider then i expected. looks more like rear wheel
should i use it or it will look awkward/unusual . ? what do you suggest ? i want to use it for RE Bullet or DOT trials bike
Thanks & Regards
-
Thanks Trialsrfun for your feedback.
-
Hi Guys
I am getting my hands on DOT frame. thinking of Greeve new engine might be good for it.
Are they eligible for Pre-65 with older frame. price looks reasonable. if build engine professionally it cost similar or more
http://www.greevesmotorcyclesltd.com/engine.html
Any ideas ?
Thanks & Regards
-
Hi Experts
Can someone help me to identify the handlebar i got with parts lot. ?
Thanks & Regards
JH
-
@ruffmutt
ohh ohh all dream just vanish away ..
luckly i havent speed too much
-
@jon v8
Very neat work . Good choice. i like it , budget is low as rising the family ..
-
Hi Guys
Picked the Villiers 10e engine on weekend. my first villiers engine.
Which is suitable Frame for this engine. Francis Barnnet , James , Cotton , Dot ? , i think bantam frame will too much of work. ?
just thinking if i get some rolling frame want to build trials bike .. I heard the Villiers 10e engine used in Cotton starmaker and they it convert to 250cc or greeve not sure.
Any advise/suggestion.
Regards
-
Thanks Iaird387 for your reply .. i think mag subscription just expired, i will have a look ..
@christian
Thanks for sharing the picture. Is it hard due to weight of bullet .. what is ideal weight in your view for bullet to perform well ?
Regards
-
Faussy : i should send them moon or Mars may be
-
Thanks @naichuff for your info ..
Do we have any statistics .. about models of bikes participated. just curious . e.g
*******************************************************************
Make Model Number of Machines
Triumph Tiger Cub 30
BSA C15 20
BSA Bantam 20
Ariel HT 10
Royal Enfield Bullet 2
and so on
-
Below video at 3:43 rider looks like 183 and seems to me royal enfield ..i might be wrong .
https://www.youtube.com/watch?v=0XuPC2IJdl8&t=232s
|
|