Jump to content

dozerash

Members
  • Posts

    125
  • Joined

  • Last visited

Everything posted by dozerash
 
 
  1. I use HFS suspension for the fork springs. They are really nice! Just make sure you give them all the information on your forks and old springs. https://suspensionhfs.com/en/
  2. I take the plastic plugs out of the clutch cover and tip the bike in a pan to drain oil. Works well for me.
  3. What brand is the hydraulic clutch? I have a TL320, run 60:1 Amsoil Dominator, 80wt Bel Ray Gearsaver (Maxima is good too), I use OZO shocks with heavy springs.
  4. dozerash

    TX311/TXR312

    Looks like your air boot mounts perfect with the Climber airbox! I would really like more information on this modification. Thanks
  5. dozerash

    TX311/TXR312

    Nice TX311! Do you have any closer pictures of your climber airbox? What did you use for an air boot? My original is no good. How do you get to the air filter/top of air box? The sub frame is in the way on mine. Thanks
  6. dozerash

    TX311/TXR312

    My air boot is in bad shape. At the Tryals Shop we tried several airbox/air boots and nothing came close to working. There is a guy on facebook that reproduces them but is out of stock. I wish I could make my own.
  7. https://www.gbmotosport.it/gbmotosport homepage.html# GB Motosport makes the actuator kit.
  8. dozerash

    TX311/TXR312

    My TXR312 is still in progress. I’ve found all the parts for the engine. Wanted to do something different for the air filter, with no luck. Climber airbox is a lot different and won’t fit. Need to find the stock air filter. Need to find a shift lever too.
  9. I use Belray 80wt Gearsaver, works great and have been using it for about 5 years in my 1980 SWM TL320. I had a small leak at shifter/Kickstarter shaft and doubled the O rings. Haven’t had a leak in a couple of years now!
  10. dozerash

    TX311/TXR312

    Made some progress on the TXR312.
  11. dozerash

    TX311/TXR312

    Anyone have the Aprillia TX/TXR air boot/air filter remade? Can a climber airbox/filter be made to fit? Or anything else be made to work? My boot is bad and filter is almost gone.
  12. dozerash

    TX311/TXR312

    I recently picked up a TX311 frame, exhaust, rear suspension etc. I just bought a TXR312 last night in need of a lot of work. What are the differences between the two models (besides rear brake and shock)? The frames look similar except for extra tabs on the 312 for shock, extra mount on mid muffler. On my 312 the shock is leaking oil, bearings are bad. Has wrong muffler. The 311 swingarm, shock, suspension bearings, frame, exhaust are all good. Thanks
  13. I had a Montesa 349 that I mounted the condenser on the frame under the tank to keep it cooler. On my SWM I used a timing box I made to set points. I have since switched the ignition to electronic (about 3 or 4 years ago). I bought the kit from MotoSWM, works awesome! I switched my carb to a OKO from MidAtlantic trials, that also works awesome! They do make a OKO kit for the 240 Rotax.
  14. dozerash

    2x2 SWM TL320

    Someone posted this picture on Facebook, looks like Bernie Schreiber got to try out the 2X2 SWM!
  15. Thanks, very helpful! Look at Motoswm website, I think there was a engine service manual on there for the Rotax engine. Also try Old Knobbies both are SWM, but uses basically the same Rotax engine.
  16. Part fits perfectly
  17. My cover after being milled out.
  18. This set up works well on my SWM. I’m looking to modify two other bikes I have. Not having any luck finding the newer style actuator parts.
  19. dozerash

    Electronic Ignition

    My bike is still running great with this ignition system! No problems! The only complaint is not having the lighting coil. Has anyone been able to install a lighting coil with this system? I would rather not bother with battery lights. We have a couple of night trials, the sections are under lights but it’s nice to have a headlight on from section to section.
  20. I’m going to be working on a friends 1985 Can Am (Armstrong) 240 (Rotax) trials bike. I have a couple of SWM 320s (280 Rotax) . So I know where to get any engine parts. The body and frame parts I’m not so sure about. We need the following: muffler... ...carb kit... ...seat... ...all cables... ...decals... ...intake tube from carb to engine...since it has the Amal carb the intake tube appears different(smaller id) SWM? ...air filter... ...rear sprocket... ...front and rear fenders ...what handlebars do you recommend?.. thanks
  21. dozerash

    TL320 Seat

    Yeah your right I should get rid of that bracket that someone made. I would like to fabricate a simple quick release for the seat.
  22. dozerash

    TL320 Seat

    This bracket was what someone had on another SWM I had. Any ideas to make this work?
  23. dozerash

    TL320 Seat

    I have a 1980 SWM TL320 that I have a new seat for. The old one was strapped on. Anyone have a good way to mount the seat and be able to take it off easy to work on filter? This one doesn’t have the quick release because at one time it had a metal tank. Thanks
  24. I’m from the States, I’ve never heard of JCM?
 
×
  • Create New...