Jump to content

papapitufo

Members
  • Posts

    30
  • Joined

  • Last visited

Posts posted by papapitufo
 
 
  1. 2 hours ago, section swept said:

    Please re-read what was stated. We all have ways and means to carry out difficult tasks and my observations if you feel they were out of kilter then feel free to “report post”. As for resident Troll I feel that was totally uncalled for. And as papapitofu posted some very useful photos and it’s their post let them decide about your suggestion??

    Hi.
    It does not say it for your comment, it is for another user.
    Pleased to show you the repair process.
    Greetings.

    • Thanks 1
  2. Hi.
    For those who want to know how to disassemble the gearbox, the pinion must be heated to about 200ºc.

    Now I'm going to change the bearings.
    They are references of Gasgas.
    MT280236158
    MT280232043

    Cheers.

    IMG_2564.JPG

    IMG_2565.JPG

  3. 18 hours ago, canada280i said:

    Does Xavi have any custom factory 300 maps lying around that are not part of the package generally available?

    Hi. I ignore it.
    In the software package are the Evo6, and Factory14.
    Try to contact him.

  4. On 22/6/2018 at 1:02 PM, mge said:

    hello everyone.

    i dont know if this is the right spot to ask but have to start somewhere.

    have a 2012 tr280i thats really hard to start. i have just purchased a diagnostic link cable but am not having any luck with getting the k-scan program.

    not too many people to turn to in rural australia.

    have done lots of reading these forums but still cant really put my finger on the problem. wanted to see what the ecu is reading before pulling anything else appart

    thanks for any help .

    mark.

    I was able to start the first or second kick.
    It is necessary to have a very clean filter, butterfly and admission.
    I mix it at 0.6% (30cc per 5 liters)
    It also helps to reset the tps.

  5. I´m in the same situation.

    Connections from usb to bike:

    BLACK to BLACK/YELLOW GROUND

    RED to WHITE/BLUE POWER

    ORANGE to WHITE. TX

    YELLOW to YELLOW RX

    BROWN and GREEN must be bridged. CTS+RTS

    DRIVER MUST BE THE OLDER, 2011 OR 2012

    mine is USB-RS232-WE-1800-BT_5.0

    Please, need to try whith another software, anyone has teh original?

    Thanks.

     

 
×
  • Create New...