Jump to content

fiona

Members
  • Posts

    10
  • Joined

  • Last visited

Posts posted by fiona
 
 
  1. Hi, my husband recently bought a 349 and relocated the condenser to under the tank. Seem to have an issue with water ingress to the magneto area after riding burn sections at a recent trial.

    He's sealed the magneto casing using instant gasket but water still managed to get in.

    Thinking of just drilling a hole at the bottom of the casing to let the water escape. Any comments or suggestions would be appreciated.

    Cheers, Fiona

  2. I bought red & blue plastic documents wallets out of the Pound Shop and got approximately 20 squares (4in x 3in) from each folder.  With a bit of heated wire punched holes in them.  Was given some fencing wire for free and hey presto, threaded the wire through the holes and made up my own flags for not a lot of money.  The corrugated plastic sheeting would be ideal and a bit more flexible but the cost is a bit inhibitive unless you can get some really cheap/free.

    • Like 2
  3. Thanks feetupfun.  I'll get my husband to take some pictures and post here.

    And he went for the easiest fix.  Ground off 4mm from the brake sit of the drum and used a 4mm shim on the opposite side.  All square now.

     

     

    Cotta 349.jpg

  4. My husband recently bought a Cota 349.  He has noticed that the front wheel does not sit central within the front forks.  If he tries to use shims/spacers on the axle to centralise the wheel then the front suspension doesn't seem to work properly (stiff and not return properly).  There isn't any speedo fitted.  Does the wheel normally sit slightly towards the right hand fork, or anyone suggest how to rectify this.

    Thanks in advance.

     

 
×
  • Create New...