Jump to content

MIckyT

Members
  • Posts

    38
  • Joined

  • Last visited

Everything posted by MIckyT
 
 
  1. Get a Beta Evo 125 cc great reliable bike and so easy to ride.
  2. Definitely 110% Trust in South West trials i have bought 5 bikes off them and they are brilliant in all aspects. Great people to deal with buy with confidence.
  3. Try Vince at Haven Trialsport he was the UK importer i think
  4. Red Galfer brake pads and BP5ES plug
  5. It will fit Evo gear levers have been the same fit since 2009 when Evo came out.
  6. MIckyT

    Beta evo 2023

    Usually October
  7. The S3 levers are very good quality feel nice and very Strong
  8. Araldite the magnet in and put the lanyard on throttle side you wont need both
  9. yes they will fit fine save them
  10. Standard version Beta rear shock absorber are made by SACHS
  11. Front sprocket hooked a little causes this
  12. I think longer (factory 2017 0nwards) shock is aprox 285mm standard is 275mm but linkage is different lengths with the longer shock
  13. the 2017 factory onwards has a longer shock and different length linkage to acount for the longer shock 2018 factory shock onwards changed to an Olle R16v shock Ohlins make both length shocks
  14. MIckyT

    Evo 4t chain

    if a previous owner has altered gearing by + or -1 tooth it might not need half link
  15. MIckyT

    Evo 4t chain

    probably 101 links to start when new your chain could have been shortened after it stretched
  16. MIckyT

    Evo 4t chain

    yes its not a special chain but is a special length you need a half link fitting to get the correct length Your Beta importer should have this chain ready to go on the shelf OEM regina very good quality last ages
  17. strong circlip pliers will undo the cap
  18. MIckyT

    Exhaust packing

    The silencer would definitely benefit from being repacked i would say makes a big diference to performance to , easy job with some good quality packing do it in 30 mins perhaps
  19. Yes it was ex Ian Baker used to be white the one he rode Normondales on
  20. 14 factory had a white frame, magnesium engine casings, black anodised billet yokes, and some red anodised bits the new type ignition and alloy casing not plastic black cylinder head Its not a 14 factory all evos say factory on clutch case
  21. MIckyT

    Tech forks

    (following) I think there should be a spacer inbetween the brake calliper and fork leg too What thickness is the wheel spacer ?
  22. 2000 Rev 3 had upside down forks
  23. MIckyT

    Base gasket

    Trials and Tribulation ltd have 250 evo piston kit in stock size c
  24. MIckyT

    Base gasket

    yes depending on how you want it to run 1 X 0.5mm base gasket if you want bike to run crisp and sweet off the bottom bit more lively but can go up to 1.5mm i think which is standard (but stand to be corrected) mind you they are docile like that and pretty slow reving (standard) Base gasket thickness makes a big difference on to performance on the EVO
  25. MIckyT

    Fuel Mixture ?

    I use Castrol 1 Racing Fully Synthetic @ 75/1 in my Beta evo and it will smoke when you have to give it some especially after periods of low revs type sections I think this oil is almost to good for low revving engines
 
×
  • Create New...