Jump to content

sutty

Members
  • Posts

    142
  • Joined

  • Last visited

Posts posted by sutty
 
 
  1. On 5/1/2018 at 7:23 PM, evansm said:

    Hi all, I am rebuilding a TY250 Twinshock engine but I am trying to source the two Transmission roller bearings.

    Fig 6 item 12 P/N 93311-42018 has a number stamped on which is 20NQ3212.

    This bearing is available through bearing suppliers and TYtrials sell it as the Yamaha P/N.

    Fig 6 item 27 P/N 93313-31709 doesn't have a number stamped on it, it just has IKO.

    I have searched for the Yam P/N and there are a few available in the USA but obviously an expensive option.

    Does anyone know the generic P/N for this bearing which would give me the option of obtaining from a UK bearing supplier?

    Do you have the sizes of part number 93313-31709 

  2. cheers for the replys i wish i had the time to run it unfortualy i only get every other sunday off which is a shame but needs must i have been involved in running a club before so i no how much work goes into running a club and how its left to a few dedicacated members to keep it above board if things change at work i may be intrested

  3. this is a primative way to iliminate what the problem is take the spark plug out and put a little bit of petrol down the plug hole put the plug back in and kick it over to see if it starts if it does you know its a fuel problem if it doesnt then you know its possably electrical it is primative but it works good luck

  4. what you need is a crossbow !!!!! no noise pin them to the garage door with it then ring the police and say you can hear a funny screaming noise outside your house that will sort the job ba**ards

  5. a van is the best way forward in my opinion for this reason when you load your bike at home no one can see whats in the van so when your on your way home the scumbags cant see the bike ,where as they see you drive past with the bike on a trailer on show all they do is follow you to see where you live and then the rest is history been there an done that so van is now the only way for me

  6. tell you all now anyone who is willing to pay 5k for a gasser wants to seek medical help are you all blind a few extra bits of bling and a different carb wow !!! the bikes are vastly over priced as it is 5k for a bike that in 6 months will av a 300 quid maintanece bill so called build quality if the japs got there finger out and produced bikes that state of the art you would see build quality take the 4rt build quality this might upset the die hard gasser lads or the shirty hangers on but tuff sh*t get in the real world the sooner the price of bikes come down the better perhaps the majority of riders out there will buy a new one cheap gasser crap built to ride NOT to last try and get spares like plastics or piston kits electrics for a bike that is over 6 yrs old off shirty you might aswell p*** in the wind this should set the cat amongest the pigion as im not just speaking for myself many people think the same

 
×
  • Create New...