|
-
I have same problem. One teeth on 5-th gear was damaged. Is anybody know some internet-market, where can i buy parts for gearbox? Thank you!
-
Hi everyone. Is anybody have electric connection of OSSA Explorer? I have only TR280 workshop manual, but its not the same. Thank you!
-
Can i use this hole for lock pin?
-
Hello, Peter B. I got it, thanks so much for information!
Somebody open engine before me, i think bearing is not original, because bearing has i line, and its not stock.
Spring on the rubber is broken.
Bearing has model NAS 34.001 size 52*25*23 mm. Can you help me, i need to buy the same bearing, or maybe buy other model? Maybe from Gas-Gas, like this https://www.zonetrial.com/ArticleDetail.aspx?langue=E&Modele=Crankshaft+bearing+GasGas+TxT+pro&Id_Article=12118
-
I have to remove gear and after bearing like this?
-
Thanks so much. Can you look please, is it correct action on the photo?
-
Oil form gearbox comes to engine, because rubber on the bearing is bad. I changed out ring rubber, but it still dont work, and oil going to engine.
Is anybody know, how to change bearing?? I dont understant how to unlock this bearing.
I cant find information on manuals...
I think, i need pull gear and make hot, and after pull bearing...
-
I understand my problem: oil form gearbox comes to engine, because rubber on the bearing is bad. I changed out ring rubber, but it still dont work, and oil going to engine.
Is anybody know, how to change bearing?? I dont understant how to unlock this bearing. Thanks!
-
I make diagnostic cable, tomorrow will try connect to EFI
-
Is anybody know about kick-starter? Is possible install kick-starter from gas-gas? look like the same:
Gas-gas:
OSSA:
-
I tested injection - it's OK.
I think all problems from TPS. I bought TTL-USB convecter, and ready to make diagnostic cable. And i want to reset TPS settings in KScan.
tt
-
Hello. Can you send me please OSSA software on my e-mail: t_ema@mail.ru Thanks!
-
Thanks so much for information. I will be think about diagnostic cable.
Today checked sensors:
1. Air temperature:
Electrical resistance show 9 kOmh, room degree. If i make heat - resistance going down. I dont know, is it correct, i know only, if i change temperature resistance change.
2. Air pressure
I give 5 V and check voltage. In standard in my room show me 3,5 V
I made vacuum by my mouth and voltage going to 1,9 V
I dont know, is it good value or not, but i know - if i change air pressure, value is change too (the same like air temp.)
3. TPS.
I check voltage in 2 position TPS on throttle (left and right).
1. position. From 0,825 (idle) to 1,893 (full gas)
2. position. From 0,955 (idle) to 2,276 (full gas)
My TPS is broken? If i remove TPS from throttle i dont see 0,6 any way. 0,8 is start.
4. Injection
My friend have car repair box and he have stand to check injection, like this
But i cant find standard, i need to know:
1. Gasoline pressure
2. Frequency per min (how much injection will be opened and closed per 1 minute)
3. How much gasoline will be in a test tube per 1 minute.
I can just look spray (good or not). Like this
-
Thank you very much, a lot of information in your notebook. After read you notebook i understand did mistake, i removed not air temp sensor, its air pressure sensor (in air box).
Today i want to remove temp sensor (in throttle) and check sensor .
-
Hello. I am from Russia. Sorry for my bad language. I bought OSSA Explorer, and after 3 hours i get black spark(spark was new NGK BP5ES). Air filter was clean, and i use synthetic oil for 2 stroke 10 ml/1 l gasoline.
Its problem because too much gasoline in injection. I dont have diagnostic cable, and i want to check all sensor and wires, fuel Injector, and fuel pump. I remove temp air sensor, throttle position sensor and fuel Injector to check.
And my fuel injector have number FBYCG80 800 1808.
Its fuel injector from Subaru Impreza
I think its not original fuel injector, but look same.
It's my
its original (part number 9110010211) from https://trialstribulations.net/index.php?main_page=product_info&cPath=26&products_id=2348
Is anybody know, my fuel Injector is original? If not, do you have a picture of original, or do you know maybe car part number, because its fuel injector from car or moto (OSSA did not produce fuel injection) . Thank you!
|
|