[Beta 2008 back mudguard]

Hi so I'm after a back mudguard for a 2008 beta. Anyone got any please. 

Cheers 

[Beta Rev 3 Rear Mudguard]

Hi so I'm looking for a back mudguard for a 2008 beta.? Any one got anything 

[Fantic 300 1984 tank/side panel stickers]

Hi,

Anyone know where I can get a good set (that actually stick) of tank/side panel stickers for a 1984 fantic 300? Please. You know the sort of s shape ones down the side. Thanks

[Fantic 300 1984 paint code]

Hi anyone know what the paint code is for an original paint on a 1984 fantic please 

[Fantic 300 1984 woodruff key searing]

43 minutes ago, fourex said:

65-70Nm according to my Fantic 300 manual.

Thanks very much 

[Fantic 300 1984 woodruff key searing]

1 hour ago, hero said:

My 1986 241 has sheared its woodruff key and the flywheel is now jammed on the shaft

Ive broken a puller trying to remove it

Any ideas on getting the flywheel off?

 

Tighten up the puller until it's tight then give the end of the puller a sharp but not to hevey hit with a hammer, may as well put a little bit of heat on flywheel near to shaft aswell

[Fantic 300 1984 woodruff key searing]

On 5/15/2023 at 11:39 PM, kurtas said:

Theoretically the woodruff key should not take any load from the engine at all, it only locates the flywheel correctly for timing purposes.
I would be investigating the torque you are using to retain the flywheel onto the tapered fit.
Also worth checking the tapered fit itself and maybe lapping it to correct if the fit/surface is poor

Any idea what sort of torque on flywheel nut?? 

[Fantic 300 1984 woodruff key searing]

Hi, so my fantic 300 1984 has been shearing woodruff keys not that often but a couple of times?? I used to have a 200 that did it a few times over a few years. Is this just a fantic thing of is there something else going on?? Thanks 

[fantic 300 1984 marzocchi shocks]

Why would I bother rebuilding the rear shocks b40rt? what sort of stupid question is that? if it was a show bike then I wouldn't worrie if there was any oil in them at all!!! you silly man!! or woman!

[fantic 300 1984 petrol tank/side panel fantic badges]

Hi dose anyone have or know of where I can get new or in good condition fantic 300 1984 badges for the side panels/petrol tank covers? the silver and black ones there are some on ebay but they don't look like they are very good.

thanks for the info

[fantic 300 1984 marzocchi shocks]

thanks for the info.

so one person has said 200-220ml and someone else has said 90-95ml. anyone have anymore info about it please?

thanks.

[fantic 300 1984 marzocchi shocks]

ATF????

 

[fantic 300 1984 marzocchi shocks]

Dose anyone know how much oil to put in marzocchi shocks (each side) for a fantic 300 1984? and what oil? 

thanks.

[Fantic 241 oil leak from Gearbox]

Hi I have just got a 300 1984 and there's a oil leak around the spyglass or view glass  any ideas on what to do? ?