The RPM suddenly became unstable.
I changed the 9v battery to a new one, but it just says that the battery is weak and it doesn't start.
If I connect the external power, the engine will start. The RFM is unstable.
If you turn off the external power, the engine will turn off.
It's because of the negative electrode. Is it because of this?
I don't remember where the cathode paper was.
I'd like to know where to connect.
Anyong ha seo Jeong Won, It is easier to press the push kill button to wake up the ECU, it will then be energised for 7 seconds (I think it was 7 but may be a few more) by the battery. When the Map light blinks constantly, quickly, that is an indication that the battery power is too low. You need to have a re-chargeable 9v battery on those older bikes that provides enough current, 9v 200mA or similar. I have used a standard non re-chargable 9v battery in an emergency but the bike was always best with the re-chargeable. Just to get the motor going, there is a 12vDC plug under the petrol flap that you can hook in a 12v battery into. There could be other reasons why your bike does not start. Was the bike working when you got it?
hello peterb
12v jack asks if it's right here
Does the circle in the picture match the arrow on the parts list?
Anyong ha seo Jeong Won, It is easier to press the push kill button to wake up the ECU, it will then be energised for 7 seconds (I think it was 7 but may be a few more) by the battery. When the Map light blinks constantly, quickly, that is an indication that the battery power is too low. You need to have a re-chargeable 9v battery on those older bikes that provides enough current, 9v 200mA or similar. I have used a standard non re-chargable 9v battery in an emergency but the bike was always best with the re-chargeable. Just to get the motor going, there is a 12vDC plug under the petrol flap that you can hook in a 12v battery into. There could be other reasons why your bike does not start. Was the bike working when you got it?
hello peterb.
Thank you very much for your answer.
there is a 12vDC plug under the petrol flap that you can hook in a 12v battery into?
I wrote again. I put the parts list picture
I would appreciate it if you could tell me which number to connect 12v to Can 12v batteries use rc car batteries?
Hello.
I'm the only vertigo in South Korea. It doesn't start, so ask a question
Unplug the magnetic kill switch to wake up the ecu
When the map led blinks constantly, I kickstar.
Then the map led will blink very fast and the start will not start
I want to know why
9v battery replaced with new one
The plug was also replaced with a new one.
Where should I connect the 2016 cathode contact?
in Vertigo
Posted
Thank you.
One side is hung on the bolt of the white Hasalpyo and the other side is disconnected.