What insert would be stock in an '18 rr? I was perusing the web and came across the s3 inserts in high and low compression. They offer "standard" as well...
Had a buddy come out today, he rode my GG280 and I took my RR 250(2018). When I had the bikes side by side, the RR is quite about lower to the ground than the GG.
No real static sag in the rear and about 10mm up front on the RR. The bike is new to me, so I never noticed until today! We rode a couple sections and I actually did tag the skid where I never have on the GG. Are the TRS just a smidge lower by design?
Ive had a chance to take the 250 out. Like it so far, brakes are top notch. Front end is really light feeling, almost skating a bit but its probably my body position.
Going to try some hardrocks instead of the curves, feel like it pitches me forward.
Definitely going to bump it up to 280cc though.. The grunt isn't quite where I would like it. Possibly to 300? If anyone has experience with 280 vs 300 I would love to hear it!
I bought a nice clean 250... Felt good on the short test run :) Maybe less jammy than the GG 280, but still nice and easy to make the front end levitate.
Ive already requested pricing on the goodies to go up in displacement (Thinking 280) but we shall see! Maybe I will like it as is.
I ride a 280 GG, just wondering which '18 TRS RR would be comparable? I like the snap the 280 has, fast throttle fitted. No deficiencies in the motor for me.
Will I be underwhelmed by the 250? The 300 seemed really smooth, but I have yet to ride the 250.
Anyone who has ridden both, I would like a quick review if possible
Does the black tube and white tube share the same housing? The nice fella I bought my bike from fitted the slow tube, and also gave me the fast tube with the bike.
Id like to fit the fast, but wonder if I can just swap tubes and not the whole works. This is a Domino FWIW
First post here.. The boys txt pro 125 was spitting coolant a bit today! Fan wasn't running, so I gave the fan a flick and off she goes! Ran as it should. We did a few stops/starts to see if the fan would initiate on its own, and it did about 50% of the time and the other 50% a small flick got the fan running right away. I put 12v to the fan, and it wouldn't start on its own every time.. But a flick gets er goin every time. Seems the thermostat works, and when you get the fan going it spins nice and quick. The fan does have a little noise to it when trying to start though.
Am I correct in thinking the fan is packing it in?
2017 txt rear brake
in Gas Gas
Posted
reverse bleed, forward bleed and do it again.. Went through this recently. Its a pain!