[2014 Beta evo 250 fan question]

It will be the thermostat   Good idea to cable tie a bridging wire to the plug under the seat  just in case it fails again in the middle of nowhere 

[New rider 125/200/250]

Beta evo 250 ideal all rounder and ideal for easy resale if you decide to upgrade

[FEUL TANK BUCKLED HOW DO I FIX IT?]

Fill it with boiling water

[Stinking of fuel]

When I’m out my evo my wife tells me I stink of s- - -e  as well

[Beta Rev-3 250 2T 2008 - front fork tech advise]

Fork legs all normal and your rear wheel is tubeless so get that tube out and sort the  sealing tape

[Speaking of Shocks]

A big difference 

[2018 Evo 200]

Some people put a new set of mains in and class that as a rebuild need to find out the extent of it all first

[97 Beta Techno triple clamp broken]

Pretty sure a rev 3 one won’t be far away

[Repair 2014 Beta Evo 2T Air Box Damage?]

Use an automotive plastic bumper repair kit  it comes as two part  and mixes through the nozzle  as long as the job is clean it will give you a good permanent repair

[Prep & Paint for Old Pitted Mag Engine Covers?]

Just prime it with a cellulose etch primer and top coat it with 2k 

[Which to choose ?]

Evo  without a doubt 

[How do you carry stuff: phones, wallets, keys ?]

Don’t carry anything leave everything in the car then hide the car key  that way you can’t  drop it and lose it 

[Beta "Clutch Noise"]

My 19 evo done it from brand new  as does my Fantic so did my vfr800 and I’ve now got a Yamaha tracer that also does it so I wouldn’t  give it another thought and get on with enjoy riding it 

[An old newbie with questions.]

Nice retro trailer that did you make it out of your old bath

[Honda TLR Gear shifter problem]

Bin that linkage

[Hodaka custom trail 1970]

Pile of sh.te in my eyes

[Stupid question time:]

Petrol as good as any leave it to dry for 10 mins and re oil

[Cleaning with WD40]

Rhino shine after you wash

[acceptable boots]

Just bite the bullet and buy a cheaper set of trial boots there just over £100 you won’t regret it  

[Hour tacho meter]

I’ve always used the cheapo Chinese ones and they’ve always been fine

[TLR steering bearings]

Whip them out and get the numbers off them and order a set from your supplier

[When to do a top end? 05 Rev 200]

Leave it alone if it’s quiet and running fine there not like mx bikes that need regular rebuilds 

[Beta Evo 38mm right fork bottom bolt problem]

Give it a wee whiz with an impact gun to loosen or tighten but go easy as it’s just alloy

[Please help, 290 crank nut remove]

Look at the portion of thread that’s sticking through the nut and see how it’s cut and you’ll be able to work it out from there

[How Often Do You Change Your Oil?]

About every 2 years at this rate