[2018 evo fan motor]

It will just be a Chinese made motor same as the rest get the sizes and do your homework on the net I’m sure you will find something for not much money

[Fantic 200 exhaust joining rubber]

2t trials and all your other Fantic  parts too

[First FantIc 200]

Looks a good repair I would just leave it

[Fantic 305]

2t trials fife 

[I hate my rear brakes]

Don’t bother the rebuild kit for the m c just bite the bullet and buy a new master cylinder most bother with brakes comes from the m c 

[Fantic paint on eBay ( recommendation)]

4 hours ago, suzuki250 said:

Unless you have a professional spray shop leave 2K well alone.

If you don’t have the right safety equipment, it will ruin your health permanently!

Paint it outside on a nice day  with a mask on and you’ll be fine it’s not as if your doing it every day it’s only a one off

[Fantic paint on eBay ( recommendation)]

2k definitely best paint for the job on top of an etch primer

[REV 3 Inner Clutch Cover Replacement]

I done what Kurtus said and it was leaking again in months just bite the bullet and buy the inner clutch casing for £100 ish it’s an easy fit  if it’s your sons bike he might not notice it’s leaked all the fluid out and then you will have a much more expensive seize to repair 

[Beta evo fuel tap boss]

No welded in

[200/240/300 ?]

200 s are great bikes but 240s can be started in gear which is a big plus 

[Steel G'Box debris identification 2017 EVO]

I’d be tempted just to ride it if it’s still feeling ok and let it develop you might split the crank cases and not find anything 

[Factory forkseal replacement]

Give it a wee whiz up with an impact gun until it bites then torque it up manually but go easy 

[Got to ride my bike soon But]

Get all that filler chipped off and see what ur dealing with no reason why it can’t be repaired if it’s Ali 

[Stuck dog bone bolt...new frame or go ride?]

Take the swinging arm and shock off and get a angle grinder with a 1mm disc and run it through cutting the bolt leftovers so you can remove the dog bone 

[Help needed]

Slide it back in under the bench and buy a fantic a guy in our club used to call them multi gyms for good reason

[Fantic side panel fixings.]

Buy a box of mixed ones from eBay  you’ll get what you need out of them 

[Fantic 200 starting problems]

Yes I had the same problem with one of the original coils replace it and take it from there 

[Fantic 200 starting problems]

Is your coil an alloy cylinder or a moulded plastic one 

[cleaning spandex trials pants]

Fling them in the washing machine with your wife’s clothes when she’s not in and they come up like new that’s what I’ve been doing for the last 10 years

[New Montesa Cota]

Jet wash it ,let it dry a bit and cover the whole bike in rhino shine

[Engine Stand]

Naccy ,makes sense if your doing a lot of rebuilding 

[OKO Carburetors]

Put one on my 200 fantic and it totally transformed it but don’t buy a cheap one (£25 ) as they are a copy of a copy

[Damaged Fork Replacement/Repairs??]

Araldite then wet and dry it smooth

[240 Pro sounds lean but it’s not]

Bin that champion plug for starters fit a ngk 

[Bending back Braktec levers??]

Give them a good heat with a plumbers torch in a vice before bending back or they will break