Jump to content

stanmet

Members
  • Posts

    79
  • Joined

  • Last visited

Everything posted by stanmet
 
 
  1. hi most clubs in the south have a sportsman class now and the cub would be fine go and enjoy and learn
  2. hi deryk i still have that engine that was in peters bike on a shelf in my workshop hillman imp piston in it making it 290 cc
  3. hi deryk thanks for the trip down memory lane the enfield was nice strong bike the trend at the time was to make engines bigger so it went from 350 to 420 useing one of your favorite bikes piston the b40 it had greeves grivon clutch the gearbox allways let it down ok if you was allways in bottom gear the enfield was never as good as my ajs cheers stan
  4. hi mine was allways barbour they was all handme downs being a apprentice at amc everybody felt sorry for me still got hugh vineys body belt he gave me good memorys stan
  5. thanks deryk sorry about the spelling first time i used to put the bobby dodgers on sun night and go to work on it monday morning stan
  6. hi this was my greeves in the sixtys scramble in the summer trials in the winter stan
  7. hi derek nice to see you back hope you are well keep it coming stan
  8. hi drake its a fairly easy to shorten them but do it from the bottom so you dont have to rethread the tops cut the 2inches off with disk cutter because chrome is very hard then counter bore for the alloy tube then circlip groove follow what was in the the bit u cut off i never shortened the dampers just the springs worked ok for me best of luck stan
  9. hi try undoing wheel spindle nut then see if its any better your spacers might be not quite right or mudguard stays best of luck stan
  10. got my insoles from tescos and there washable and u cut them to size to the printed lines on them stan
  11. ray smalls no is 0238o693183 nice bloke stan
  12. hi ive had a pair of wulfsport boots for 6 months well pleased so far use wd spray on them still got a pair of gearns but they have got very expensive stan
  13. hi before u go any futher try some freshly bought petrol i had a simler broblem stan
  14. hi float level should be 24 mm
  15. hi all why not the riders that dont want to go non stop trials form there own club do all the paper work lay out stop sections and the riders that want that will come simple stan
  16. hi big john its just my wheelbase was longer than the book says i just wonderd what was differnt nothing wrong just curious stan
  17. hi thanks 4stroke same as mine workshop manual and other articals says 51 and three quarters wheelbase but the shortest i can get is 53 and a quarter it grips and steers ok but i was puzzeled about wheelbase thanks again stan
  18. hicould any rtl owners tell me the measurement from centre of swinging arm spindle to front of rear spindle slot thanks stan
  19. hi same problem on rtl i cut ks lever half way through on in side it bent easly to were i wanted it then welded gap up worked well stan
  20. hi the small reh hubs use yamaha fs1e brake shoes stan
  21. i thought it was a realy good trial cc done a good job stan
  22. hi barfly mine does it now and again once in about 4 trials its seems to go straight through stan
  23. hi i find using fully sinthetic oil in the rtl makes the clutch slip stan
  24. stanmet

    rtl 4rt

    thanks for the replys it was the trials world i was after looked through the copies i had but i must have lent it out thanks again stan
  25. stanmet

    rtl 4rt

    hi i wonder if any one can help there was an article in one of the magazines comparing the 80s rtl with the modern 4rt i cant remember which one can enybody help stan
 
×
  • Create New...