Jump to content

Flywheel Removal For This Dummy


ktmsprocket
 Share

Recommended Posts

OK. SO i put the impact wrench on the nut and it won't shift. Tried both directions in the end...

Please can someone confirm whether to rotate the nut clockwise or counter....?

and..

should it be this hard to get the retaining nut off??

Cheers. J

Edited by KTMSprocket
Link to comment
Share on other sites

 

 

I would imagine it has maybe never been off and has corroded a little and have the original loctite on it.

The flywheel needs holding, either with a strap wrench of some description or make up a holding tool with a lump of steel and two correctly positioned bolts.

Link to comment
Share on other sites

 

Hi KTM,

You can get a 12v electric impact wrench from Repco for about $75. I've found mine very handy. And you'll need it when you change the fork oil too.

Or bring your bike up the freeway to my place and I'll sort it out here for you.

Best of balance.

Neo

PS. After you've adjusted the timing you can test it out on the rocks up here...... but please..... leave any other Enduro/MX/SuperCross bikes, you might have, at home :thumbup:

Edited by Neo
Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...